From: Nick <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Tuesday, June 17, 2014 at 6:01 PM To: "[email protected]" <[email protected]> Subject: Re: [beagleboard] Creating The SGX Driver For Ubuntu 14.04
> Still getting the same errors when running the Magic Lantern demo again. I¹m running Debian. If I don¹t run /etc/init.d/rc.pvr, I get the same error you get. root@arm:/opt/gfxsdkdemos/ogles2# ./OGLES2ChameleonMan Can't open keypad input device (/dev/input/event0) Exit message has been set to: "PVRShell: Unable to initialise EGL ". PVRShell: EGL Error (EGL_BAD_ALLOC) InitAPI failed! PVRShell: Unable to initialise EGL root@arm:/opt/gfxsdkdemos/ogles2# /etc/init.d/rc.pvr start Loaded PowerVR consumer services. root@arm:/opt/gfxsdkdemos/ogles2# ./OGLES2ChameleonMan Can't open keypad input device (/dev/input/event0) PVRShell: EGL 1.4 initialized Regards, John > > > On 18 June 2014 12:46, John Syn <[email protected]> wrote: >> >> From: Nick Apperley <[email protected]> >> Reply-To: "[email protected]" <[email protected]> >> Date: Tuesday, June 17, 2014 at 5:33 PM >> To: "[email protected]" <[email protected]> >> Subject: Re: [beagleboard] Creating The SGX Driver For Ubuntu 14.04 >> >>> Both omaplfb and pvrsrvkm modules are already loaded. Also the rc.pvr daemon >>> is automatically started during boot. Where is 335x-demo on Ubuntu 14.04? >> I suspect that Robert¹s installer would have already done this setup, but if >> this is any help, this is what it does: >> >> oot@arm:~# /etc/init.d/335x-demo >> 0x10205 >> release8.x >> installing 8.x SGX release user libraries >> >> Installing PowerVR Consumer/Embedded DDK 'sgxddk_1.10@2359475' on target >> >> File system installation root is / >> >> Uninstalling existing version sgxddk_1.10@2359475 >> Uninstallation completed. >> boot script rc.pvr -> /etc/init.d/rc.pvr >> kernel module pvrsrvkm.ko -> /lib/modules/3.12.5-bone10.4/extra/pvrsrvkm.ko >> kernel module omaplfb.ko -> /lib/modules/3.12.5-bone10.4/extra/omaplfb.ko >> shared library libGLES_CM.so -> /usr/lib/libGLES_CM.so.1.10.2359475 >> shared library libusc.so -> /usr/lib/libusc.so.1.10.2359475 >> shared library libGLESv2.so -> /usr/lib/libGLESv2.so.1.10.2359475 >> shared library libglslcompiler.so -> /usr/lib/libglslcompiler.so.1.10.2359475 >> shared library libIMGegl.so -> /usr/lib/libIMGegl.so.1.10.2359475 >> shared library libEGL.so -> /usr/lib/libEGL.so.1.10.2359475 >> shared library libpvr2d.so -> /usr/lib/libpvr2d.so.1.10.2359475 >> shared library libpvrPVR2D_BLITWSEGL.so -> >> /usr/lib/libpvrPVR2D_BLITWSEGL.so.1.10.2359475 >> shared library libpvrPVR2D_FLIPWSEGL.so -> >> /usr/lib/libpvrPVR2D_FLIPWSEGL.so.1.10.2359475 >> shared library libpvrPVR2D_FRONTWSEGL.so -> >> /usr/lib/libpvrPVR2D_FRONTWSEGL.so.1.10.2359475 >> shared library libpvrPVR2D_LINUXFBWSEGL.so -> >> /usr/lib/libpvrPVR2D_LINUXFBWSEGL.so.1.10.2359475 >> shared library libsrv_um.so -> /usr/lib/libsrv_um.so.1.10.2359475 >> shared library libsrv_init.so -> /usr/lib/libsrv_init.so.1.10.2359475 >> shared library libPVRScopeServices.so -> >> /usr/lib/libPVRScopeServices.so.1.10.2359475 >> binary pvrsrvctl -> /usr/local/bin/pvrsrvctl >> binary sgx_init_test -> /usr/local/bin/sgx_init_test >> binary services_test -> /usr/local/bin/services_test >> binary sgx_blit_test -> /usr/local/bin/sgx_blit_test >> binary sgx_clipblit_test -> /usr/local/bin/sgx_clipblit_test >> binary sgx_flip_test -> /usr/local/bin/sgx_flip_test >> binary sgx_render_flip_test -> /usr/local/bin/sgx_render_flip_test >> binary pvr2d_test -> /usr/local/bin/pvr2d_test >> shader glsltest1_vertshader.txt -> /usr/local/bin/glsltest1_vertshader.txt >> shader glsltest1_fragshaderA.txt -> /usr/local/bin/glsltest1_fragshaderA.txt >> shader glsltest1_fragshaderB.txt -> /usr/local/bin/glsltest1_fragshaderB.txt >> >> Installation complete! >> You may now reboot your target. >> >> Regards, >> John >> >>> >>> >>> On Wednesday, 18 June 2014 12:25:10 UTC+12, john3909 wrote: >>>> >>>> From: Nick Apperley <[email protected]> >>>> Reply-To: "[email protected]" <[email protected]> >>>> Date: Tuesday, June 17, 2014 at 5:00 PM >>>> To: "[email protected]" <[email protected]> >>>> Subject: Re: [beagleboard] Creating The SGX Driver For Ubuntu 14.04 >>>> >>>>> Did install the mesa-dev type packages including mesa-dev-extra, which has >>>>> the OpenGL ES 2.0 utilities (eg es2_info, es2gears). >>>> Here is what I do to run QT5.1.1 on V3.12 >>>> >>>> /etc/init.d/335x-demo >>>> reboot >>>> insmod /lib/modules/3.12.5-bone10.4/extra/pvrsrvkm.ko >>>> insmod /lib/modules/3.12.5-bone10.4/extra/omaplfb.ko >>>> /etc/init.d/rc.pvr start >>>> /opt/gfxsdkdemos/ogles2/OGLES2ChameleonMan >>>> >>>> The demo works fine. >>>> >>>> Regards, >>>> John >>>>> >>>>> >>>>> >>>>> On Wednesday, 18 June 2014 11:51:53 UTC+12, RobertCNelson wrote: >>>>>> >>>>>> This happens when the mesa libegl.so get's installed.. >>>>>> >>>>>> Fixup with: >>>>>> >>>>>> sudo cp -v /usr/lib/libEGL.so /usr/lib/arm-linux-gnueabihf/libEGL.so >>>>>> sudo cp -v /usr/lib/libGLESv2.so >>>>>> /usr/lib/arm-linux-gnueabihf/libGLESv2.so >>>>>> >>>>>>> > =========================================================== >>>>>>> > >>>>>>> > Very similar error messages when trying to run the sample JavaFX 8 >>>>>>> program >>>>>>> > remotely (via SSH). Robert can you please confirm if you can run one >>>>>>> of the >>>>>>> > SGX demos (eg Magic Lantern) successfully, and post the results from >>>>>>> running >>>>>>> > the fbset -i and es2_info commands (locally). >>>>>> >>>>>> Regards, >>>>>> >>>>>> -- >>>>>> Robert Nelson >>>>>> http://www.rcn-ee.com/ >>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google Groups >>>>> "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send an >>>>> email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout >>>>> <https://groups.google.com/d/optout> . >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google Groups >>> "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send an >>> email to [email protected]. >>> >>> For more options, visit https://groups.google.com/d/optout. >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the Google >> Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/vHmA5ZuYoHw/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
