As I remember , You can user pserial.exe download from serial port . And You can write u-boot.bin to flash .only one thing should be notice , some version u-boot on dm3730 use 8 bit bch load kernel and filesystem switch ecc mode to soft and 1bit to write u-boot.bin pserial.exe can download from ti dvsdk
Regards 2014-06-18 14:29 GMT+08:00 pablokorn <pavelkorneyc...@gmail.com>: > Good time of day to everyone! > How can I update boot loader in internal flash DM3730 on BeagleBoard-xM? > Only with JTAG(I dont have them yet)? Maybe by UART or else? > And other question: how to check that boot loader in internal flash DM3730 > not corrupted and starting well (my beagleborad-XM not new). > I connect board to terminal on Win7 with UART and no messages get, that > internal flash DM3730 started to work. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.