Hello, We are using TiWi-R2 module. We have connected TiWi-R2 with processor (iMX6) through level translator (twl1200). We observed that clock and command are going to TiWi-R2, but TiWi-R2 is not responding. We did not see any activity in SDIO lines. We verified the power sequencing and clock signal, it looks good. but TiWi-R2 is not responding.
Please help us what could be the reason. Thanks & Regards Sekar On Sunday, February 12, 2012 8:37:39 AM UTC+5:30, Christopher Piggott wrote: > > Does anybody know if there yet exists a BeagleBone to TiWi-R2 cape, or > at least a reference design? > > I know for WiFi it uses SDIO, and I think I an use mmc1. I'm not sure > whether or not I should wire to a specific IRQ. > > The HCI interface is serial ... not sure if I should try to use a > specific serial port. > > This page: > > > http://processors.wiki.ti.com/index.php/OMAP35x_Wireless_Connectivity_Solution_Hardware > > > gives some good info for OMAP that's probably mostly relevant to bone. > > I haven't figured out where to get the 32 kHz clock yet. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
