On Mon, Jun 23, 2014 at 1:51 AM, Patrick Walters <[email protected]> wrote: > I think I have things setup, but i'm getting weird interactions. > Specifically, I can't seem to get GPSD to work and CGPS, but I can get cat, > gpsmon and can access from python over serial. > > cgps shows NO FIX and times out after a few seconds. > > I can CAT the dev and I see the GPS > > root@beaglebone:/# cat /dev/ttyO1 > $GPGGA,054109.000,2117.0000,N,15749.0000,W,1,6,1.02,117.9,M,4.7,M,,*7C > $GPGSA,A,3,27,16,22,21,31,29,,,,,,,1.37,1.02,0.91*04 > $GPRMC,054109.000,A,2117.0000,N,15749.0000,W,1.03,311.83,230614,,,A*7E > $GPVTG,311.83,T,,M,1.03,N,1.91,K,A*3E > > > GPSMON works > > root@beaglebone:/# gpsmon /dev/ttyO1 > > /dev/ttyO1 9600 8N1 Generic NMEA> > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ > ▒Time: 2014-06-23T05:41:51.000Z Lat: 21 17' 01.841" N Lon: 157 49' 50.591" > W ▒ > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Cooked PVT > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ > ▒ GPVTG GPGGA GPGSA GPRMC GPGSV > ▒ > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Sentences > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ > ▒Ch PRN Az El S/N ▒▒Time: 054151.000 ▒▒Time: 054151.000 > ▒ > ▒ 0 18 90 65 16 ▒▒Latitude: 2117.0000 N ▒▒Latitude: 2117.0000 > ▒ > ▒ 1 22 181 54 16 ▒▒Longitude: 15749.0000 W ▒▒Longitude: 15749.0000 > ▒ > ▒ 2 21 19 47 13 ▒▒Speed: 1.32 ▒▒Altitude: 122.1 > ▒ > ▒ 3 16 320 39 34 ▒▒Course: 219.11 ▒▒Quality: 1 Sats: 6 > ▒ > ▒ 4 29 83 26 0 ▒▒Status: A FAA: A ▒▒HDOP: 1.28 > ▒ > ▒ 5 31 220 20 15 ▒▒MagVar: ▒▒Geoid: 4.7 > ▒ > ▒ 6 27 312 17 29 ▒▒▒▒▒▒▒▒▒▒▒▒▒ RMC ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ GGA > ▒▒▒▒▒▒▒▒▒▒▒▒▒ > ▒ 7 25 151 14 0 > ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒Ŀ > ▒ 8 14 170 4 22 ▒▒Mode: A 3 ▒▒UTC: RMS: > ▒ > ▒ 9 15 74 3 18 ▒▒Sats: 27 16 18 22 21 31 ▒▒MAJ: MIN: > ▒ > ▒10 36 0 0 0 ▒▒DOP: H=1.28 V=0.97 P=1.61 ▒▒ORI: LAT: > ▒ > ▒11 ▒▒▒▒▒▒▒▒▒▒▒▒▒ GSA ▒▒▒▒▒▒▒▒▒▒▒▒ٳLON: ALT: > ▒ > ▒▒▒▒▒▒▒ GSV ▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒▒▒▒▒ GST > ▒▒▒▒▒▒▒▒▒▒▒▒▒ > (39) $GPVTG,219.11,T,,M,1.32,N,2.45,K,A*34\x0d\x0a > root@beaglebone:/# > > > > > > > > Background Information > > Wiring > > Ultimate GPS BBB > RX --------------- P8_24 > TX --------------- P8_26 > > > Debian Version > > root@beaglebone:/# uname -a > Linux beaglebone 3.8.13-bone50 #1 SMP Tue May 13 13:24:52 UTC 2014 armv7l > GNU/Linux > > > Overlays > > root@beaglebone:/# cat /sys/devices/bone_capemgr.9/slots > 0: 54:PF--- > 1: 55:PF--- > 2: 56:PF--- > 3: 57:PF--- > 4: ff:P-O-L Bone-LT-eMMC-2G,00A0,Texas Instrument,BB-BONE-EMMC-2G > 5: ff:P-O-L Bone-Black-HDMI,00A0,Texas Instrument,BB-BONELT-HDMI > 7: ff:P-O-L Override Board Name,00A0,Override Manuf,BB-UART1 > > > > Any ideas?
Did you try the steps at http://www.catb.org/gpsd/troubleshooting.html? Thanks for the output of 'gpsmon', but have you tried launching gpsd with additional verbosity such as 'gpsd -N -D3 -F /var/run/gpsd.sock'? Can you share the output? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
