Hi William - Good news - with another SD card from a friend I was able to boot the BBB. So as you mentioned, there is possibly something off with my SD card. Will re-format and try again. Thanks for the quick reply!
*Michaël* On Monday, June 23, 2014 7:05:33 AM UTC+2, William Hermans wrote: > > Hi Micheal. > > I have not experienced this exact problem myself but have experienced > similar problems ( single power led lit only ). DO you know which kernel > version that flasher image is using ? > > I suspect this may be EEPROM related but short of that have you tried > flashing an earlier version ? I'm personally using . . > > *$ cat /proc/sys/kernel/osrelease* >> *3.8.13-bone47* >> > > on an A5A Beaglebone black, and it works fine. Also, what does the file / > partition structure look like on the sdcard ? > The first ( FAT ) partition should have . . . > > *root@arm:/boot# ls -a* >> *. .. uEnv.txt uEnv.txt.save uboot* >> *root@arm:/boot# cd uboot/* >> *root@arm:/boot/uboot# ls -a* >> *. .. MLO dtbs u-boot.img uEnv.txt zImage* >> *root@arm:/boot/uboot# cd dtbs/* >> *root@arm:/boot/uboot/dtbs# ls -a* >> *. am335x-boneblack.dtb am335x-tester.dtb >> omap3-beagle.dtb omap4-panda-a4.dtb omap4-sdp.dtb* >> *.. am335x-evm.dtb omap2420-h4.dtb >> omap3-evm.dtb omap4-panda-es.dtb omap4-var-som.dtb* >> *am335x-bone.dtb am335x-evmsk.dtb omap3-beagle-xm.dtb >> omap3-tobi.dtb omap4-panda.dtb omap5-evm.dtb* >> > > *uEnv.txt.save* Should not exist on your sdcard( I run a modified boot > setup ). > > Also for refference. > > *root@arm:/# lsblk* >> *NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT* >> *mmcblk1boot0 179:16 0 1M 1 disk* >> *mmcblk1boot1 179:24 0 1M 1 disk* >> *mmcblk0 179:0 0 14.7G 0 disk* >> *|-mmcblk0p1 179:1 0 48M 0 part /boot/uboot* >> *`-mmcblk0p2 179:2 0 14.6G 0 part* >> *mmcblk1 179:8 0 1.8G 0 disk* >> *|-mmcblk1p1 179:9 0 70.6M 0 part* >> *`-mmcblk1p2 179:10 0 1.7G 0 part* >> *root@arm:/# blkid* >> */dev/mmcblk0p1: SEC_TYPE="msdos" LABEL="boot" UUID="0E8A-D5A6" >> TYPE="vfat"* >> */dev/mmcblk0p2: LABEL="rootfs" >> UUID="abf43946-e917-4a00-a9b5-a93386d2d5ed" TYPE="ext4"* >> */dev/mmcblk1p1: LABEL="BEAGLEBONE" UUID="5147-0BEE" TYPE="vfat"* >> */dev/mmcblk1p2: LABEL="Angstrom" >> UUID="ded34392-3812-4b8d-ab38-342da9a4b0d8" TYPE="ext4"* >> > > I still have the original ( well updated once ) Angstrom on the MMC. > mmcblk0 is the sdcard. > > > > On Sun, Jun 22, 2014 at 2:41 PM, <[email protected] <javascript:>> wrote: > >> Today I've flashed my BBB rev B with Debian 7.5 (went quicker than the >> described 45 minutes). After playing with the network settings I wanted to >> reboot "shutdown -r now", when I did that the BBB did not came up anymore.. >> Only the power led is on, other USR leds are not on, whatever I try >> (holding boot, power button, reset button, ...). >> >> After a while I connected the Serial Debug cable and I'm seeing the >> following message. >> .\�(kR֨�[X��(V,�#�Y.�,.H�YX�Z�,�Z[X��SI��,�Y�k R�&.HK�KLC���$HQ��CR ### >> Please RESET the bcard ### >> C�UK��,�*TS��014.04-00014-c43880f5 (Apr 22 2014 - 132354) >> �YX�Z�,�X���C�.\[(kR֨�[X��(V,ר�.#HY��cr readinc imace arcs, err - -1 >> readinc 5-bcc4.imc >> .\�(kV֨�[X��(V,�#�Y.�,.H�YX�Z�,�Z[X��SI��,�Y�k R�&.HK�KLC���$HQ��CR ### >> Plea3e RESET 4he bcard ### >> C�UK��,�*TS��014.04-00014-c43880f5 (Apr 22 2014 - 132354) >> �YX�Z�,�X���C�.\�(kR֨�[X��(V,Ө�&#HY��cr readinc imace arcs, err - -1 >> readinc 5-bcc4.imc >> .\�(kR֨�[X��(V,�#�Y.�,.H�YX�Z�,�Z[X��SI��,�Y�k R�&.HK�KLC���$HQ��CR ### >> Plea3e RESET the bcard ### >> C�UK��,�*TS��014.04-00014-c43880f5 (Apr 22 2014 - 132354) >> �YX�Z�,�X���C�.\�(kV֨�[X��(V,Ө�&#HY��cr readinc imace arc3, err - -1 >> readinc 5-bcc4.imc >> .\�(kR֨�[X��(V,�#�Y.�,.H�YX�Z�,�Z[X��SI��,�R�k R�&.HK�KLC���$HQ��CR ### >> Plea3e RESET the bcard ### >> >> Only when pressing the RESET button I'm receiving feedback, however the >> same as above. >> >> Googling did not bring me to any relevant topics so I tried the following >> without luck >> >> - Boot from SD >> - Re-flash emmc >> - power over USB or 5VDC >> >> Would be good to see if anyone else saw this before and/or has a solution >> to this. >> >> Thanks, >> *Michaël* >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
