Did this ever get fixed? I'm running a 3.14 archlinux arm kernel and am running into the same problem. Which image is the "5_08" image?
Thanks a lot, Peter Chinetti On Wednesday, June 26, 2013 5:34:25 PM UTC-4, Gerald wrote: > > We did. It does not work. > > 5_08 image does however work. > > > And if you change the uENV.txt file in the FAT partition, the logo changes > size. > > Gerald > > > > On Wed, Jun 26, 2013 at 4:29 PM, Holger Rusch <[email protected] > <javascript:>> wrote: > >> Hi, >> >> Nope. It didn't. None of the resolutions i tried. The logo is always the >> same size. >> >> Bedtime now. Maybe you can try with your lapdock. Cu. Holger. >> >> Am 26.06.2013 um 23:24 schrieb Gerald Coley <[email protected] >> <javascript:>>: >> >> OK. I stand corrected. Did it work? >> >> Gerald >> >> >> >> On Wed, Jun 26, 2013 at 4:15 PM, <[email protected] <javascript:>> >> wrote: >> >>> ??? >>> >>> powered up ... >>> >>> login as: root >>> [email protected] <javascript:>'s password: >>> root@beaglebone:~# mount | grep BEAGLEBONE >>> /dev/mmcblk0p1 on /media/BEAGLEBONE type vfat >>> (rw,nosuid,nodev,relatime,fmask=0022,dmask=0077,codepage=437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro) >>> root@beaglebone:~# lsblk >>> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT >>> mmcblk0boot0 179:8 0 1M 1 disk >>> mmcblk0boot1 179:16 0 1M 1 disk >>> mmcblk0 179:0 0 1.8G 0 disk >>> |-mmcblk0p1 179:1 0 70.6M 0 part /media/BEAGLEBONE >>> `-mmcblk0p2 179:2 0 1.7G 0 part / >>> root@beaglebone:~# cat /media/BEAGLEBONE/uEnv.txt >>> >>> optargs=quiet drm.debug=7 capemgr.disable_partno=BB-BONELT-HDMI >>> video=HDMI-A-1:1280x768@60 >>> >>> Everything I put in there survives a boot. >>> >>> From what I see it is the right disk. There is no sdcard inside my BBB. >>> >>> Am Mittwoch, 26. Juni 2013 22:57:25 UTC+2 schrieb Gerald: >>>> >>>> That file is created by reading the uENV.txt file in the FAT partition. >>>> It gets created on boot up. So, changing that does nothing. >>>> >>>> Gerald >>>> >>>> >>>> >>>> On Wed, Jun 26, 2013 at 3:10 PM, <[email protected]> wrote: >>>> >>>>> Actually my uEnv.txt in /media/BEAGLEBONE consist of: >>>>> >>>>> optargs=quiet drm.debug=7 capemgr.disable_partno=BB-BONELT-HDMI >>>>> video=HDMI-A-1:1280x768@60 >>>>> >>>>> I tried many possible resolutions from here: >>>>> http://circuitco.com/support/index.php?title= >>>>> BeagleBoneBlack_HDMI#Default_Resolutions >>>>> >>>>> The BB-logo at the start is alway the same size. Roughly 80% width of >>>>> my screen of the atrix. >>>>> >>>>> Still no X. >>>>> >>>>> Am Dienstag, 25. Juni 2013 22:22:21 UTC+2 schrieb Gerald: >>>>>> >>>>>> Have you tried something other than 640x480? The BeagleBone Logo >>>>>> means that everything is basically working, but the resolution in the >>>>>> kernel does not make the Atrix happy. The resolution change in the >>>>>> uENV.TXT >>>>>> file from what I have seen only sets the LOGO resolution. You can see >>>>>> the >>>>>> LOGO size change as you change resolutions. When the kernel reads the >>>>>> EDID, >>>>>> it takes over from there. >>>>>> >>>>>> I have an Atrix, but I have not used it in a long while. I didn't >>>>>> like the screen. I will see if I can find it, I hope, and I can have one >>>>>> of >>>>>> my guys work with it to see what he can come up with. >>>>>> >>>>>> Gerald >>>>>> >>>>>> >>>>>> >>>>>> On Tue, Jun 25, 2013 at 3:15 PM, <[email protected]> wrote: >>>>>> >>>>>>> I am using the latest image now. Now there is no video after boot on >>>>>>> console 2 at all. Console 1 shows me a terminal. >>>>>>> >>>>>>> It worked with the 5.27. image, but only one low resolution an no >>>>>>> way to change. >>>>>>> >>>>>>> Now i got: >>>>>>> >>>>>>> optargs=quiet drm.debug=7 capemgr.disable_partno=BB-BONELT-HDMI >>>>>>> video=HDMI-A-1:640x480@60 >>>>>>> >>>>>>> in uEnv.txt (no SD-Card, internal storage, changed via SSH). >>>>>>> >>>>>>> No video. After the boot, there is the BB-Logo and after that >>>>>>> console 2 dead, console 1 terminal. >>>>>>> >>>>>>> dmsg drm part shows: >>>>>>> >>>>>>> [ 0.640695] [drm:drm_helper_probe_single_connector_modes], >>>>>>> [CONNECTOR:5:HDMI-A-1] >>>>>>> [ 0.689315] [drm:drm_detect_monitor_audio], Monitor has basic >>>>>>> audio support >>>>>>> [ 0.689350] [drm:tilcdc_crtc_mode_valid], mode 720x576@50 >>>>>>> pixel-clock 27000 audio true cea true can_output true >>>>>>> [ 0.689379] [drm:drm_detect_monitor_audio], Monitor has basic >>>>>>> audio support >>>>>>> [ 0.689397] [drm:tilcdc_crtc_mode_valid], mode 720x480@60 >>>>>>> pixel-clock 27000 audio true cea true can_output true >>>>>>> [ 0.689421] [drm:drm_detect_monitor_audio], Monitor has basic >>>>>>> audio support >>>>>>> [ 0.689439] [drm:tilcdc_crtc_mode_valid], mode 640x480@60 >>>>>>> pixel-clock 25175 audio true cea true can_output true >>>>>>> [ 0.689464] [drm:drm_mode_debug_printmodeline], Modeline >>>>>>> 9:"1366x768" 63 75500 1366 1380 1436 1500 768 769 772 800 0x40 0x5 >>>>>>> [ 0.689494] [drm:drm_mode_prune_invalid], Not using 1366x768 mode >>>>>>> 11 >>>>>>> [ 0.689517] [drm:drm_mode_debug_printmodeline], Modeline >>>>>>> 8:"1366x768" 60 72000 1366 1380 1436 1500 768 769 772 800 0x48 0x5 >>>>>>> [ 0.689545] [drm:drm_mode_prune_invalid], Not using 1366x768 mode >>>>>>> 11 >>>>>>> [ 0.689571] [drm:drm_helper_probe_single_connector_modes], >>>>>>> [CONNECTOR:5:HDMI-A-1] probed modes : >>>>>>> [ 0.689590] [drm:drm_mode_debug_printmodeline], Modeline >>>>>>> 12:"720x576" 50 27000 720 732 796 864 576 581 586 625 0x40 0xa >>>>>>> [ 0.689619] [drm:drm_mode_debug_printmodeline], Modeline >>>>>>> 11:"720x480" 60 27000 720 736 798 858 480 489 495 525 0x40 0xa >>>>>>> [ 0.689648] [drm:drm_mode_debug_printmodeline], Modeline >>>>>>> 10:"640x480" 60 25175 640 656 752 800 480 490 492 525 0x40 0xa >>>>>>> [ 0.689677] [drm:drm_setup_crtcs], >>>>>>> [ 0.689695] [drm:drm_enable_connectors], connector 5 enabled? yes >>>>>>> [ 0.689714] [drm:drm_target_preferred], looking for cmdline mode >>>>>>> on connector 5 >>>>>>> [ 0.689731] [drm:drm_target_preferred], looking for preferred >>>>>>> mode on connector 5 >>>>>>> [ 0.689749] [drm:drm_target_preferred], found mode 720x576 >>>>>>> [ 0.689765] [drm:drm_setup_crtcs], picking CRTCs for 2048x2048 >>>>>>> config >>>>>>> [ 0.689788] [drm:drm_setup_crtcs], desired mode 720x576 set on >>>>>>> crtc 3 >>>>>>> >>>>>>> >>>>>>> Am Dienstag, 25. Juni 2013 21:47:30 UTC+2 schrieb Gerald: >>>>>>>> >>>>>>>> It will default to a resolution that supports the audio, CEA >>>>>>>> resolution. If you want access to all resolutions you need to follow >>>>>>>> the instructions here: >>>>>>>> >>>>>>>> http://circuitco.com/support/index.php?title=BeagleBoneBlack >>>>>>>> _HDMI#Default_Resolutions >>>>>>>> >>>>>>>> You should then be able to see them in the >>>>>>>> System->Preferences->Monitors menu after a reboot. >>>>>>>> >>>>>>>> Make sure you are using the latest image.. >>>>>>>> >>>>>>>> >>>>>>>> Gerald >>>>>>>> >>>>>>>> >>>>>>>> On Tue, Jun 25, 2013 at 2:27 PM, <[email protected]> wrote: >>>>>>>> >>>>>>>>> root@beaglebone:/sys/class/drm/card0/card0-HDMI-A-1# parse-edid >>>>>>>>> edid >>>>>>>>> parse-edid: parse-edid version 2.0.0 >>>>>>>>> parse-edid: EDID checksum passed. >>>>>>>>> >>>>>>>>> # EDID version 1 revision 3 >>>>>>>>> Section "Monitor" >>>>>>>>> # Block type: 2:0 3:ff >>>>>>>>> # Block type: 2:0 3:fd >>>>>>>>> # Block type: 2:0 3:fc >>>>>>>>> Identifier "MotoAttach" >>>>>>>>> VendorName "MOT" >>>>>>>>> ModelName "MotoAttach" >>>>>>>>> # Block type: 2:0 3:ff >>>>>>>>> # Block type: 2:0 3:fd >>>>>>>>> HorizSync 30-85 >>>>>>>>> VertRefresh 50-75 >>>>>>>>> # Max dot clock (video bandwidth) 150 MHz >>>>>>>>> # Block type: 2:0 3:fc >>>>>>>>> # DPMS capabilities: Active off:no Suspend:no Standby:no >>>>>>>>> >>>>>>>>> Mode "1366x768" # vfreq 60.000Hz, hfreq 48.000kHz >>>>>>>>> DotClock 72.000000 >>>>>>>>> HTimings 1366 1380 1436 1500 >>>>>>>>> VTimings 768 769 772 800 >>>>>>>>> Flags "+HSync" "+VSync" >>>>>>>>> EndMode >>>>>>>>> # Block type: 2:0 3:ff >>>>>>>>> # Block type: 2:0 3:fd >>>>>>>>> # Block type: 2:0 3:fc >>>>>>>>> EndSection >>>>>>>>> >>>>>>>>> >>>>>>>>> Am Dienstag, 25. Juni 2013 19:39:51 UTC+2 schrieb Gerald: >>>>>>>>> >>>>>>>>>> Try this http://circuitco.com/support/index.php?title=BeagleBone >>>>>>>>>> Black_HDMI#Default_Resolutions >>>>>>>>>> >>>>>>>>>> Sounds like the Atrix has no EDID information. >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>>>> --- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "BeagleBoard" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to [email protected]. >>>>>>>>> >>>>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>> For more options, visit http://beagleboard.org/discuss >>>>>>> --- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "BeagleBoard" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>>>> >>>>>>> >>>>>>> >>>>>> >>>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/groups/opt_out. >>>>> >>>>> >>>>> >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected] <javascript:>. >>> For more options, visit https://groups.google.com/groups/opt_out. >>> >>> >>> >> >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
