I am building an console app on beaglebone black arm7 angstrom/debian. I
need some pins used by the HDMI/AUDIO.
Disabeling the AUDO cape in the uEnv.txt does not help disabeling HDMI will
not let my program run. I get
QWSSocket::connectToLocalFile could not connect:: Connection refused
so is qt4.8 on arm7 embedded always use the frame buffer. Profile is set
to console debug networking??.
I can run without -qws but get error.
Any help would be appreciated.
Mark
P8_17 gpio 27 output not working
P8_14 gpio 26 output not working
P8_18 gpio 65 output not working
P8_13 gpio 23 output not working
P9_25 gpio 117 output not working
P9_31 gpio 110 input not working
P9_29 gpio 111 input not working
P9_28 gpio 113 input not working.
pin mux settings below.
0x1b4 0x07 /* P9_41 GPIO # 20 OUTPUT MODE7 RTS */
0x1a8 0x1f /* P9_41 GPIO #116 INPUT MODE7 RTS */
0x164 0x07 /* P9_42 GPIO # 7 OUTPUT MODE7 RTS */
0x1a0 0x27 /* P9_42 GPIO #114 INPUT MODE7 RTS */
0x034 0x27 /* P8_11 GPIO #45 INPUT MODE7 RTS */
0x030 0x27 /* P8_12 GPIO #44 INPUT MODE7 */
0x024 0x07 /* P8_13 GPIO #23 OUTPUT MODE7 */
0x028 0x07 /* P8_14 GPIO #26 OUTPUT MODE7 */
0x03c 0x27 /* P8_15 GPIO #47 INPUT MODE7 */
0x038 0x27 /* P8_16 GPIO #46 INPUT MODE7 */
0x02c 0x07 /* P8_17 GPIO #27 OUTPUT MODE7 */
0x08c 0x07 /* P8_18 GPIO #65 OUTPUT MODE7 */
0x07c 0x07 /* P8_26 GPIO #61 OUTPUT MODE7 */
0x19c 0x37 /* P9_28 GPIO #113 INPUT MODE7 */
0x194 0x37 /* P9_29 GPIO #111 INPUT MODE7 */
0x190 0x37 /* P9_31 GPIO #110 INPUT MODE7 */
0x1ac 0x07 /* P9_25 GPIO #117 OUTPUT MODE7 */
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
