On Wed, Jul 2, 2014 at 12:08 PM, jmelson <[email protected]> wrote: > Hello, all, > > I have a Beagle Bone Black rev C, running the latest machinekit > distribution. > I have been logging in with ssh as I don't have a micro-HDMI adapter cable > yet. Everything works fine for 18 minutes, then it powers down. just > before > powering down, I see this message : > $ [ 426.564569] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data > mode. Opts: (null) > > Then, about a minute later it says : > Broadcast message from root@beaglebone (Mon May 19 16:19:26 2014): > > The system is going down for system halt NOW! > > the shutdown looks pretty normal until the end, where I see : > [ 1152.630360] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) > Disabling swaps. > Detaching loop devices. > Detaching DM devices. > [ 1152.706640] (NULL device *): gadget not registered. > [ 1152.713833] musb-hdrc musb-hdrc.0.auto: remove, state 4 > [ 1152.719488] usb usb2: USB disconnect, device number 1 > [ 1152.725486] musb-hdrc musb-hdrc.0.auto: USB bus 2 deregistered > [ 1152.732434] Power down. > [ 1152.735088] System will go to power_off state in approx. 2 secs > [ 1152.743313] Kernel panic - not syncing: Attempted to kill init! > exitcode=0x00000000 > [ 1152.743313] > [ 1152.753043] [<c0010145>] (unwind_backtrace+0x1/0x98) from [<c04db79f>] > (panic+0x6b/0x168) > [ 1152.761696] [<c04db79f>] (panic+0x6b/0x168) from [<c0031b47>] > (do_exit+0x5cb/0x64c) > [ 1152.769808] [<c0031b47>] (do_exit+0x5cb/0x64c) from [<c003bc2f>] > (sys_reboot+0xef/0x144) > [ 1152.778377] [<c003bc2f>] (sys_reboot+0xef/0x144) from [<c000c921>] > (ret_fast_syscall+0x1/0x46) > [ 1152.787479] drm_kms_helper: panic occurred, switching back to text > console > > > I have run e2fsck by plugging the SD card into a USB card reader on my > desktop system, > it finds no errors. > > Anybody know what is going on? I'm pretty baffled. This 18 minutes to > power down > seems to be pretty repeatable.
Are you sure this wasn't labeled as a "flasher" image, 18 minutes is about how long it takes to flash the eMMC with 1.7Gb of data. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
