I 
have 
http://www.amazon.com/Edimax-EW-7811Un-Adapter-Raspberry-Supports/dp/B003MTTJOY 
and I also have http://www.adafruit.com/products/814 and I'd trade a kidney 
to get either of the damn things working.

when i run `lsusb` they both seem to use the same driver:

*root@beaglebone:~# lsusb*

*Bus 001 Device 002: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 
802.11n Wireless Adapter [Realtek RTL8188CUS]*


my logical device is wlan0.  my etc/network/interface lines are:


*auto wlan0*

*allow-hotplug wlan0*

*iface wlan0 inet dhcp*

*    wpa-ssid [network name here]*

*    wpa-psk [password here]*


when i fire it up via ifup or boot, ifconfig reports:


*wlan0     Link encap:Ethernet  HWaddr 80:1f:02:ee:68:ef  *

*          inet addr:10.0.0.33  Bcast:10.0.0.255  Mask:255.255.255.0*

*          inet6 addr: 2601:8:a580:8d2:821f:2ff:feee:68ef/64 Scope:Global*

*          inet6 addr: fe80::821f:2ff:feee:68ef/64 Scope:Link*

*          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1*

*          RX packets:337 errors:0 dropped:0 overruns:0 frame:0*

*          TX packets:355 errors:0 dropped:0 overruns:0 carrier:0*

*          collisions:0 txqueuelen:1000 *

*          RX bytes:41326 (40.3 KiB)  TX bytes:42056 (41.0 KiB)*


which you'd think would be good!  my router hands out 10.0.0.* addresses 
and 10.0.0.33 looks good to me.


usually at this point i can get one or two pings in, maybe 3, but that's 
it.  i also notice after a reboot i usually can't get any pings in to the 
same url, but i can get a ping or two to a different url. then i'm totally 
fucked.


so, i know i'm getting online fine, i can wget the google homepage and view 
it successfully, but shortly thereafter i'm done.


i've tried adding a bund of other lines to my interface file, such as 
wireless-rate auto, and wireless-channel 1 (or 11...i have two routers one 
on channel 1, one on channel 11, but neither works any better.


i tried moving my wpa info to a wpa_supplicant.conf file per other 
directions, but same result.  pretty sure it's the same thing, 
just different config files.


this is a brand new beagle bone black i just got from adafruit yesterday. 
 it is running debian 7 wheezy.  


totally stumped.  :(  any help would be immensely appreciated.



-- 
For more options, visit http://beagleboard.org/discuss
--- 
You received this message because you are subscribed to the Google Groups 
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
For more options, visit https://groups.google.com/d/optout.

Reply via email to