You were right on William. Cutting and pasting on a Windows machine was the problem.
Thank You sir! On Friday, July 4, 2014 1:25:43 PM UTC-3, William Hermans wrote: > > Having optargs on the same line as bootargs is not a requirement. > > Mike, did you per chance copy paste that optargs line from within Windows > ? uEnv.txt does not take kindly to Windows style line breaks. > > > > On Fri, Jul 4, 2014 at 9:16 AM, Jerônimo Lopes <[email protected] > <javascript:>> wrote: > >> Mike, I think you should set 'optargs' argument at the same line off >> 'bootargs'. >> >> Here's an example that I used to disable Hdmi (virtual) cape: >> bootargs=console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext4 >> rootwait optargs=quiet >> capemgr.disable_partno=BB-BONELT-HDMI,BB-BONELT-HDMIN \n >> uenvcmd=mmc dev ${mmcdev};load mmc ${mmcdev} ${loadaddr} uImage;load mmc >> ${mmcdev} ${fdtaddr} am335x-boneblack.dtb;bootm ${loadaddr} - ${fdtaddr} \n >> >> I've added the '\n' just here, to show where the line ends. >> >> Jerônimo Lopes >> >> >> 2014-07-04 10:06 GMT-03:00 mike rankin <[email protected] <javascript:>>: >> >> I have a 2G BBB running the latest Debian and I'm following the Adafruit >>> Oled Learning tutorial located here: >>> https://learn.adafruit.com/ssd1306-oled-displays-with-raspberry-pi-and-beaglebone-black/wiring >>> >>> but adding the line *optargs=capemgr.enable_partno=BB-SPIDEV0 *to uEnv.txt >>> and rebooting bricks my BBB. When the line is added and I reboot all the >>> leds are lit and I cannot communicate to it. I have to flash the OS to get >>> it working again. >>> >>> Mike >>> >>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected] <javascript:>. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
