That will be the last resort in case nothing else works. The reason why i prefer not to do that is because the BBB will be integrated into a system that will be one whole functional block and because of the design of the adapter board (which cannot be changed at this point ) i had to remove the Ethernet adapter from the board. I could put it back until i install WiFi but that would undesirable.
2014-07-04 20:43 GMT+02:00 Robert Nelson <[email protected]>: > On Fri, Jul 4, 2014 at 1:39 PM, Cristian Mitu <[email protected]> > wrote: > > Hello guys, > > > > > > I am looking for tutorials on how to install wifi on my BeagleBone Black. > > Problem is i need to do so without pluging in an Ethernet cable (because > of > > a project restriction). I will be using Debian as an OS and i want to > know > > if there is any way to install wifi without using the Ethernet adapter. > If > > you have any solutions or tutorials to which you could direct me please > tell > > me. I thank you in advance for your response. > > Plug it in via eth0, set things up so wifi works, unplug eth0, deliver > project. > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/5pp4BBxXhpY/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
