Cristian, There is a table of power consumption conditions in the TRM for the Beaglebone black. 460 ish mA when everything like USB / ethernet / hdmi etc is used( if memory serves ) But do double check, as my memory for such things isnt always perfect.
On Sat, Jul 5, 2014 at 10:42 AM, Cristian Mitu <[email protected]> wrote: > Hello, > > I need to know how much current does the beaglebone black need in two > situations: > > - worst case scenario - where everything is used (except extension headers) > - specific setup - where i use the usb for wifi , data cable plugged in > and debuger at once. > > The data sheet says 1A is sufficient for powering the board but if i have > power hungry devices like the wifi more may be needed. > > Regards, > Cristian > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
