On Tue, Jul 8, 2014 at 12:54 PM, jubishop <[email protected]> wrote: > Have people gotten this to work on the new Debian Wheezy image? When I plug > it in I just get a blank screen. > > Sorry if this is a n00b question but It has these "EEPROM" jumpers on the > back to enter an address, do I need to set that in a certain way? The only > other "cape" i'm using is this guy > (http://elinux.org/CircuitCo:BeagleBone_Battery) which also says it has > EEPROM support...i've done some googling but having a hard time finding good > documentation on the EEPROM stuff... > > Also, when you plug in the LCD cape should a graphical interface just > appear, or do i need to run whatever the equivalent of "startX" or something > from the command line to bring up the windowing system? > > The tiny slip that comes with this LCD says you can reference the quick > start guide on their products website here: > http://www.4dsystems.com.au/product/4DCAPE_43/ but neither there nor > anywhere can i actually find this supposed quick start guide. only thing > i've found of any substance is > http://www.mouser.com/ds/2/451/4DCAPE-43-Datasheet-REV1.1-262097.pdf
Humm... Do you get anything on the screen? Even something as simple as a login prompt? I don't personally have this cape, but was told it was compatible with the lcd4 dts overlay. (i have the regular lcd4 and it works) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
