I've done some research and i've found thah in kernel config is a place to configure loading of external firmware. I've made some changes but with no effect :(
<https://lh6.googleusercontent.com/-9ZxcQidkC-U/U7z2rihf_hI/AAAAAAAABYw/hxp3x9FK8qs/s1600/Zrzut+ekranu+z+2014-07-09+10%3A00%3A15.png> W dniu poniedziałek, 7 lipca 2014 13:23:39 UTC+2 użytkownik [email protected] napisał: > > Hi, > > I have my designed board with am355 procesor and TiWi R2 module. WiFi > module is connected to MMC1. I've modified kernel image based on > http://processors.wiki.ti.com/index.php/WL127x_Porting_Guide. After > booting up everytihing looks good - bluetooth enable, mmc interface, > requesting wlan enable gpio - expect, i don't see "loading firmware wl1271" > message. > > I've found a helpful post here > https://groups.google.com/d/msg/beagleboard/V4Ql6yfrhbs/FPYX541XYWwJ by > AndrewTaneGlen, so i've tried to follow this instructions. Because wifi is > my only connection to the internet i've made changes in bb recipe and i've > added > - dhcp-client > - linux-firmware-wl12xx > - wireless-tools > (i haven't found kernel-module-wl12xx-** in opkg list) > > Also i've changed WPA Supplicant and connman files. > Anyway, interface wlan0 isn't working. Still i doesn't see it after > command "ifconfig". > > I'm using kernel 3.2.28. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
