Any body have any solution ?
Also want to update that ethtool doesn't output much just link state : on Message is display i tried ethtool eth0 Link state 0 tried setting full duplex but it says Not set On Wednesday, July 2, 2014 1:13:21 PM UTC+5:30, [email protected] wrote: > > Hello, > I recently purchased *REV C* > and i am facing few problems... > > 1) The beaglebone was *working out of the box*. I connected my usb cable > plus i configured my router and connect network cable to it. > It was working great but *SLOW response (web page)* > 2) I test internet over it.. and found it to be very slow. (i was trying > to install php and it was taking to much time so i have to test the > connection speed) > it was around *5kbps very low*. I used my website and also several other > website like speedtest.nl and tested the same on my windows box which is > on the same network. > My windows box is giving 250kbps and above speed but beagle bone is only > 5kbps why ? > 3) In the process to resolve issue the above issue (2) i thought it will > be better to install latest version from the website > so i went to > http://beagleboard.org/latest-images > downloaded > http://debian.beagleboard.org/images/BBB-eMMC-flasher-debian-7.5-2014-05-14-2gb.img.xz > i was having some april edition i checked (it came with the board) > i followed the instruction > i was little confused during the procedure > > Insert SD card into your (powered-down) board, hold down the USER/BOOT >> button (if using Black) and apply power, either by the USB cable or 5V >> adapter. >> If using BeagleBone Black and the image is meant to program your on-board >> eMMC, you'll need to wait while the programming occurs. When the flashing >> is complete, all 4 USRx LEDs will be lit solid. > > so what i did exactly is > 1) Power down > 2) insert SD CARD (i followed the above steps correctly. it contain the > image data) > 3) PRESSED boot button > 4) Applied power > 5) now i see the 4 led lit i released the boot button... > > Now what is happening is the 4 led keeps blinking. LIKE > BLINK BLINK....BLINK BLINK....BLINK BLINK.... > it goes on (a little bit like heartbeat) > I can't understand what is going on is it okay... is it flashing the eMMC? > am i doing something wrong ? > > 4) Also want to ask where to get info regarding which version or image > contain what feature and function like > image feb 2014 contains PHP, MYSQL,CLOUD9 etc etc > 5) Do we need to install cloud9 separately after re flashing or does it > comes inbuilt in the image ? what exaclty comes inbuild (In the image) > 6) I want to use RELAIBLE WEBSERVER (ONLY 10 CONNECTION MAX AT ANY GIVEN > TIME) which will control the leds (for example) in real time.So which OS > will be good on the beaglebone black also > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
