Hi William and John ,
Thanks for reply!!!
The uEnv.txt that you have shared across uses the
kernel_file=zImage
and initrd_file=initrd.img but after the compilation of the yocto distro
1.6 instead of zImage I get the uImage. How to obtain the zImage ?and where
can I find the initrd.img???
Regards,
Gibson
On Friday, July 11, 2014 9:13:07 AM UTC+5:30, john3909 wrote:
>
>
> From: William Hermans <[email protected] <javascript:>>
> Reply-To: "[email protected] <javascript:>" <
> [email protected] <javascript:>>
> Date: Thursday, July 10, 2014 at 7:46 PM
> To: "[email protected] <javascript:>" <[email protected]
> <javascript:>>
> Subject: Re: [beagleboard] Transferring the image to the BBB via TFTP-
> using Yocto openembedded 1.6
>
> Supposedly you're supposed to be able to tftp zImage's now days, I've only
> ever used uImage. Lately I've stopped using tftp, and only use NFS for the
> rootfs.
>
> John Syn recently made a post on these groups saying zImage does work, and
> I've read the same a while back from somewhere else. But, I have not tried
> or tested it personally. Anyway John gave a supposedly working uEnv,txt
> setup, but again "supposedly" because I have not tried or tested it myself.
>
> Try again. uEnv.txt without initcall_debug.
>
> Regards,
> John
>
>
>
> So searching these groups for "John Syn" and uEnv.txt may yield working
> results for you. Sorry but I do not remember the post topic. Also, just as
> a FYI, I think you'll find Angstrom on the BBB to be a dead end.
>
>
> On Thu, Jul 10, 2014 at 6:46 PM, Gibson Justian <[email protected]
> <javascript:>> wrote:
>
>> Hi William and Alfredo,
>>
>> tftpboot problems
>>
>> Observation with Yocto 1.6 :
>> Below are the following observation after i executed the get
>> uImage.
>> tftp 192.168.95.130
>> tftp> get uImage
>> Received 5076896 bytes in 1.1 seconds
>>
>> Do I have to transfer the uImage or zImage? I do not find any zImage in
>> the "/build/tmp/deploy/images/beaglebone$ "
>>
>>
>> Observation with the Debian image :
>>
>> If I try the with the Debian image I get the "Bad Linux ARM zImage magic"
>> any clue on this ?
>>
>>
>> Regards,
>> Gibson
>>
>>
>>
>>
>>
>> On Friday, July 11, 2014 6:01:08 AM UTC+5:30, William Hermans wrote:
>>
>>> Gibson,
>>>
>>> Here is a blog post I made last year getting netboot working on the BBB
>>> using debian as the tftp server.
>>> http://www.embeddedhobbyist.com/debian-tips/beaglebone-
>>> black/beaglebone-black-network-boot/
>>>
>>> Scroll down to "*Installing, and configuring TFTP*" and see if you can
>>> remember if you've done all that. The rest of the article is not important.
>>>
>>>
>>> On Thu, Jul 10, 2014 at 12:28 PM, Alfredo Muniz <[email protected]>
>>> wrote:
>>>
>>>>
>>>> On Sat, Jul 5, 2014 at 11:55 AM, <[email protected]> wrote:
>>>>
>>>>> Any valuable suggestions or tips on this is helpful
>>>>
>>>>
>>>> Your bbb isn't connecting to the server or the file uImage doesn't
>>>> exist on the server. Have you tried connecting to your server using tftp
>>>> on
>>>> your local machine? Make a file called test in your tftp folder and run
>>>> the
>>>> following commands in another folder
>>>>
>>>> tftp 192.168.43.130
>>>> get test
>>>> quit
>>>>
>>>> There shouldn't be any errors and you should get the file test in the
>>>> folder you were in.
>>>>
>>>> --
>>>> For more options, visit http://beagleboard.org/discuss
>>>> ---
>>>> You received this message because you are subscribed to the Google
>>>> Groups "BeagleBoard" group.
>>>> To unsubscribe from this group and stop receiving emails from it, send
>>>> an email to [email protected].
>>>>
>>>> For more options, visit https://groups.google.com/d/optout.
>>>>
>>>
>>> --
>> For more options, visit http://beagleboard.org/discuss
>> ---
>> You received this message because you are subscribed to the Google Groups
>> "BeagleBoard" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [email protected] <javascript:>.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
> --
> For more options, visit http://beagleboard.org/discuss
> ---
> You received this message because you are subscribed to the Google Groups
> "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected] <javascript:>.
> For more options, visit https://groups.google.com/d/optout.
>
>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
