From: <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Thursday, July 24, 2014 at 2:36 AM To: "[email protected]" <[email protected]> Subject: [beagleboard] JTAG Header Connection
> Hi, > I have tried to solder my BBB with Jtag Connector on my own. But while > soldering, the copper pads from Pin 3 and 5 came off from the BBB header. How > can I fix it? > Can anyone help me out please? I am new to electronics.. Those are two important pins. Soldering these SMD connectors to the board is pretty simple and the PCB is good quality so I don¹t understand how you could pull off those pads. There are plenty of examples of PCB repairs and installing SMD connectors on youtube. Looking at the board, I think it is going to be extremely difficult to repair those pads without a decent stereoscope and fine pitch soldering iron. Regards, John > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
