From: Dallas Clement <[email protected]> Reply-To: "[email protected]" <[email protected]> Date: Friday, August 1, 2014 at 11:42 AM To: "[email protected]" <[email protected]> Subject: Re: [beagleboard] Difficulty building kernel + Angstrom from source
> I found another related topic in this discussion group which helped me get > past this. > > http://beagleboard.org/Community/Forums?place=topic%2Fbeagleboard%2FKhBhvyBVOX > Q%2Fdiscussion > > I was able to build Angstrom just fine following these instructions. These instructions are a little old. Use branch angstrom-v2014.06-yocto1.6 Regards, John > > > > On Fri, Aug 1, 2014 at 9:19 AM, Dallas Clement <[email protected]> > wrote: >> Hi All, >> >> I would like to be able to reliably build my own images for u-boot, the >> kernel, and the Angstrom rootfs. I have followed this guide in using Yocto / >> OE to do so, but no joy. >> >> >> http://wp.angstrom-distribution.org/?page_id=53 >> <http://wp.angstrom-distribution.org/?page_id=53> >> >> >> It looks like this stuff is not fully baked for the bbb. When I tried to >> build the kernel, it failed while building the Linaro toolchain. When I >> tried to build Angstrom it failed with errors also. >> >> >> Could someone please point me to the right place to look for source that will >> build reliably. I don't really have the time or desire to be debugging OE >> and the build recipes. I really wish they had used a simpler tool like >> Buildroot for this. >> >> >> Thanks, >> >> >> Dallas >> >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to a topic in the Google >> Groups "BeagleBoard" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/beagleboard/Qft8WHgSwq0/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> [email protected]. >> For more options, visit https://groups.google.com/d/optout. > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
