Sorry to push... Gerald, maybe you have an idea?
On Sunday, 3 August 2014 15:28:45 UTC+2, Rico wrote: > > Hello, > > I've noticed that the beaglebone black sometimes does not startup after a > short power loss, even when pressing the power button, it does not start. > > To reproduce with a regulated power supply (tested with BBB rev B and C): > > 1) Output of power supply 5V > 2) connect power supply to BBB > 3) BBB starts up normally > 4) down-regulate the output slowly > 5) at 3.5 V, the beaglebone turns off > 6) go back to 5V > 7) press the power button, the beaglebone won't startup > 8) go above 5.1V and press the power button => now the beaglebone starts > > I've read the datasheet of the PMIC (TPS65217C) but I cannot find out why > the BBB starts at 5.1V but not at 5V, has anyone an idea? > > Many thanks, > Rico > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
