Sounds like you popped the processor. I doubt just inserting the SD card caused this as that is done all the time and I have never heard of this causing an issue. There must have been something else at play here.
Gerald On Thu, Aug 7, 2014 at 12:29 AM, <[email protected]> wrote: > I plugged a micro sd card into my Beaglebone Black while it was running > today. It shut off the board and now it won't start with the sd card > inserted. > > The board works fine with the sd card out, but when inserted I only get a > short flash of the power let when powered on. > > So, have I popped the sd card controller? Anyone had a similar issue? > > Thanks. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
