As I said, just flashed. Default configuration with latest flasher, dchp, etc. Like a new BBB :D Flasher come from here:
wget https://rcn-ee.net/deb/rootfs/wheezy/debian-7.5-console-armhf-2014-07-06.tar.xz On Friday, August 8, 2014 9:41:07 AM UTC+2, William Hermans wrote: > > static ip ? dhcp ? Where is eth0 configured ? network manager or > /etc/network/interfaces ? > > I've only ever used /etc/network.interfaces myself, and I do not use IPV6 > ( optargs=ipv6.disable=1 ). 20-30 seconds sounds about right, however I'm > not sure I can hotplug eth0 as I mount my rootfs via NFS. . . > > > On Fri, Aug 8, 2014 at 12:19 AM, Oscar Castiblanco <[email protected] > <javascript:>> wrote: > >> Hello, >> >> *Context:* >> Linux beaglebone 3.8.13-bone60 #1 SMP Mon Jul 7 20:34:48 UTC 2014 armv7l >> GNU/Linux >> Element 14 Revision C board >> Just flashed with flasher. >> >> *Problem:* >> It takes between some seconds up to 3 mins to obtain an IPv4 address. >> When I start the BBB with network cable connected, I get the IPv4 address >> after 20-30s (perfect :D). >> The problem comes if I disconnect the network cable and connect it again >> without turning off the BBB, then it takes really long. >> >> *Important results:* >> I get always the IPv6 address after some seconds (up to 13s until now) >> >> *How did I measure it?* >> Ping answer >> >> -- >> For more options, visit http://beagleboard.org/discuss >> --- >> You received this message because you are subscribed to the Google Groups >> "BeagleBoard" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> For more options, visit https://groups.google.com/d/optout. >> > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
