Hi;
Sounds to me like them onboard emmc wasn’t flashed. There are plenty of instructions and images on the beaglebone site. Assuming you want to boot from emmc or just keep booting from uSD. Bill "No one could make a greater mistake than he who did nothing because he could do only a little." "All that is necessary for the triumph of evil is that good men do nothing" Edmond Burke (1729 - 1797) http://www.packtpub.com/building-a-home-security-system-with-beaglebone/book From: [email protected] [mailto:[email protected]] On Behalf Of daniel Sent: Friday, August 08, 2014 8:07 AM To: [email protected] Subject: [beagleboard] beaglebone boot button not working i recently got my beaglebone black rev c and tried to boot from the sd card by holding down the boot button. the power light comes on but thats it, theres no other activity. the board will boot from the sd card just fine if i dont hold down the button when it turns on. im using a 5v 3 amp adapter to power the board and there are no devices plugged into the board. is this a defective unit? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout. No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4744 / Virus Database: 3986/8000 - Release Date: 08/07/14 _____ No virus found in this message. Checked by AVG - www.avg.com Version: 2014.0.4716 / Virus Database: 3986/7978 - Release Date: 08/04/14 -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
