Robert, thanks! Is there a way to detect the cpu frequency rate in kernel? Changing sources for different boards is not a good idea 09 Авг 2014 г. 18:11 пользователь "Robert Nelson" <[email protected]> написал:
> On Sat, Aug 9, 2014 at 1:57 AM, Maxim Podbereznyy <[email protected]> > wrote: > > Hi! > > > > I'm using the v3.8.x branch from RCN with a BBB clone based on am3352 > with > > 800MHz factory rate. I can see that under heavy load the frequency goes > up > > to 1GHz while it should be limited to 800MHz. Can anybody suggest a way > to > > limit the frequency in the kernel? > > Remove this line: > > > https://github.com/beagleboard/linux/blob/3.8/arch/arm/boot/dts/am335x-boneblack.dts#L64 > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
