Good day, I have several *Beaglebone Black Rev C*. They are connected to my LAN by using a static IP address. I observed that from time to time connecting to the Beaglebone Black via ethernet is not possible.
*I identified the following behavior:* The ethernet port has two LEDs, a Green one and an Orange/Yellow one. If I apply power to the Beaglebone Black I noticed that the green LED immediately starts to blink. However, the yellow LED stays very often dark. *It simply never blinks during the whole boot process of the board*. In this case ethernet will not be available after booting linux and the board can not be reached via ethernet. *My workaround:* <https://lh4.googleusercontent.com/-ccszPy8rMis/U_Hz2KG6ngI/AAAAAAAAACM/mfEH9GBYDzE/s1600/bb_ethernet.png> Is this a known respectively a bug? I observed this with several Beaglebone Black Rev-C from Element 14. I also have 2 Rev-B boards and I think (currently not 100% sure since these boards are not used at the moment) that I observed the same behavior. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
