On Mon, Aug 18, 2014 at 2:51 PM, <[email protected]> wrote: > > <https://lh3.googleusercontent.com/-GosJEP4RR_s/U_JXVsqK24I/AAAAAAAAAAw/m7TC4uhnI9g/s1600/Debian05142914SDboot.png> > When I put the Debian 5-14-2014 SD card boot image on a 4GB SD card using > Win32 Disk Imager and > boot from the SD card I only get a 2GB system. It does say on BB.org that > it is a 2GB image. > Using df -h shows very little space left and when I tried to install > Adafruit BBIO I do not get past first > step when I get a disk full write error. > > Interesting when I boot from the flash which is 4GB on the RevC board and > do df -h it shows a 4GB size of which > 1.5GB is free and if I then insert the same SD card it mounts it as an > external drive and shows it as 4GB with > about half of it used indicating that Win32 disk image did use the whole > SD card size. > > How would one tell Debian to increase the boot size from 2GB to the whole > card when you boot from it. > Things like fdisk will not let you modify a partition if you booted from > that partition and if I mount it as > an external disk it already says it is 4GB and no need to change it. > > Or do we just need for BB.org to post a 4GB image for use in booting from > SD cards. >
http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#Expanding_File_System_Partition_On_A_microSD it gives you a hint. ;) Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
