Since upgrading to the 14-08-05 image my BBB has been locking up after operating for a while (minutes to hours).
I finally setup a terminal on the serial console and captured everything until it hung. I am getting a kernel panic. I have attached the captured console log from boot to hang. I have tried two different SD cards (one 4GB, one 8GB) with the same result. Does anyone have any ideas about what may be causing this? Dennis Cote -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
U-Boot SPL 2014.07-00016-g329fca9 (Jul 28 2014 - 12:35:02) reading u-boot.img reading u-boot.img U-Boot 2014.07-00016-g329fca9 (Jul 28 2014 - 12:35:02), Build: jenkins-github_Bo otloader-Builder-375 I2C: ready DRAM: 512 MiB NAND: 0 MiB MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 *** Warning - readenv() failed, using default environment Net: <ethaddr> not set. Validating first E-fuse MAC cpsw, usb_ether Hit any key to stop autoboot: 0 gpio: pin 53 (gpio 53) value is 1 switch to partitions #0, OK mmc0 is current device gpio: pin 54 (gpio 54) value is 1 SD/MMC found on device 0 Checking for: /uEnv.txt ... Checking for: /boot.scr ... Checking for: /boot/boot.scr ... Checking for: /boot/uEnv.txt ... gpio: pin 55 (gpio 55) value is 1 778 bytes read in 39 ms (18.6 KiB/s) Loaded environment from /boot/uEnv.txt Checking if uname_r is set in /boot/uEnv.txt... gpio: pin 56 (gpio 56) value is 1 Running uname_boot ... loading /boot/vmlinuz-3.8.13-bone62 ... 5600984 bytes read in 342 ms (15.6 MiB/s) loading /boot/dtbs/3.8.13-bone62/am335x-boneblack.dtb ... 25926 bytes read in 68 ms (372.1 KiB/s) loading /boot/initrd.img-3.8.13-bone62 ... 2861098 bytes read in 191 ms (14.3 MiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x5576d8 ] ## Flattened Device Tree blob at 88000000 Booting using the fdt blob at 0x88000000 Loading Ramdisk to 8fd45000, end 8ffff82a ... OK Loading Device Tree to 8fd3b000, end 8fd44545 ... OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.372095] omap2_mbox_probe: platform not supported [ 0.526941] tps65217-bl tps65217-bl: no platform data provided [ 0.590995] bone-capemgr bone_capemgr.9: slot #0: No cape found [ 0.628101] bone-capemgr bone_capemgr.9: slot #1: No cape found [ 0.665210] bone-capemgr bone_capemgr.9: slot #2: No cape found [ 0.702320] bone-capemgr bone_capemgr.9: slot #3: No cape found [ 0.717908] bone-capemgr bone_capemgr.9: slot #6: BB-BONELT-HDMIN conflict P8 .45 (#5:BB-BONELT-HDMI) [ 0.727523] bone-capemgr bone_capemgr.9: slot #6: Failed verification [ 0.734261] bone-capemgr bone_capemgr.9: loader: failed to load slot-6 BB-BON ELT-HDMIN:00A0 (prio 2) [ 0.750669] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' failed [ 0.813932] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8 [ 0.825598] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status -22 [ 0.832873] pinctrl-single 44e10800.pinmux: could not request pin 21 on devic e pinctrl-single Loading, please wait... systemd-fsck[225]: rootfs: clean, 78491/230608 files, 405432/922368 blocks Debian GNU/Linux 7 beaglebone ttyO0 default username:password is [debian:temppwd] Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian The IP Address for usb0 is: 192.168.7.2 beaglebone login: [ 27.698539] tilcdc 4830e000.fb: timeout waiting for framedo ne [ 31.128209] tilcdc 4830e000.fb: timeout waiting for framedone [ 47.101340] libphy: PHY 4a101000.mdio:01 not found [ 47.106451] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 52.675918] libphy: PHY 4a101000.mdio:01 not found [ 52.681045] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 57.662972] libphy: PHY 4a101000.mdio:01 not found [ 57.668241] net eth0: phy 4a101000.mdio:01 not found on slave 1 [ 642.958292] tilcdc 4830e000.fb: timeout waiting for framedone [ 943.025085] tilcdc 4830e000.fb: timeout waiting for framedone [39462.519701] libphy: PHY 4a101000.mdio:01 not found [39462.524922] net eth0: phy 4a101000.mdio:01 not found on slave 1 [39462.932134] libphy: PHY 4a101000.mdio:01 not found [39462.937230] net eth0: phy 4a101000.mdio:01 not found on slave 1 [39464.813914] libphy: PHY 4a101000.mdio:01 not found [39464.819010] net eth0: phy 4a101000.mdio:01 not found on slave 1 [59220.520811] INFO: task mmcqd/0:72 blocked for more than 60 seconds. [59220.527557] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [59220.535924] Kernel panic - not syncing: hung_task: blocked tasks [59220.542307] [<c00111f1>] (unwind_backtrace+0x1/0x9c) from [<c04c8b75>] (panic +0x59/0x158) [59220.550956] [<c04c8b75>] (panic+0x59/0x158) from [<c00724f9>] (watchdog+0x19d /0x1c0) [59220.559148] [<c00724f9>] (watchdog+0x19d/0x1c0) from [<c0045103>] (kthread+0x 6b/0x78) [59220.567424] [<c0045103>] (kthread+0x6b/0x78) from [<c000c8fd>] (ret_from_fork +0x11/0x34) [59220.575987] drm_kms_helper: panic occurred, switching back to text console
