Sorry for the lack of details, I was indeed not very precise. From what I remember, the system did not boot when no SD card (with a Linux OS on it) was inserted, and I think only 3 out of the 4 LEDs were lit. But I'm not sure about that. I'm getting a serial adapter, and also more SD cards (I only have one right now, and it's really long to reformat it each time I want to do something), and I'll get back to you with more info after retrying more rigorously!
Also, I have a strange problem where I have a REALLY hard time accessing SSH while running a Linux from the SD card: I can see the virtual network adapter in Windows, but most of the time it shows "cable not connected" and I need to reboot many times (pushing the button and waiting 1 minute for shutdown, and then reboot with the Boot button pushed) before I can finally have access to the connection). Sometimes, when the card is freshly formatted, the connection works at first boot, but as soon as I reboot it is gone... So yeah, getting a serial adapter will most definitely help. (I'm running Win7 64 bits and I have no problem whatsoever with the connection when the Linux is ran from the eMMC). Thank you RobertCNelson! Regards, Alexandre Le mardi 19 août 2014 21:49:50 UTC+2, RobertCNelson a écrit : > > On Tue, Aug 19, 2014 at 9:40 AM, <[email protected] <javascript:>> > wrote: > > Copying the files is not the problem. I have already managed to access > the > > eMMC from a Linux running on the µSD. > > > > However, when I replace the stock MLO and u-boot.img files by the newly > > compiled ones on the eMMC, it does not work (as it is meant to be put on > the > > µSD card), hence my question on how to modify the source code (so that I > can > > adapt it to work on the eMMC). > > In the official images, we use the same "MLO/u-boot.img" for both the > microSD and eMMC. It works fine.. > > So post your "actual" error instead of saying it doesn't work.. > > If you don't have a serial adapter, get one, as that will help... > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
