On Wed, Aug 27, 2014 at 9:23 PM, Robert Nelson <[email protected]> wrote: > On Wed, Aug 27, 2014 at 8:59 PM, Dallas Clement > <[email protected]> wrote: >> Hi Robert, everything builds clean and I can see SPI0 after booting. The >> devices are spi1.0 and spi1.1. However, I'm not able to see any SPI1 >> devices. Suspecting HDMI conflict, I set the status for the HDMI device to >> "disabled" in >> am335x-base0033.dts. But that didn't seem to help. Anything else you can >> think of that I should check? > > Okay, i should probally remove all non "bb.org" boards.. am335x-base0033.dts > > am335x-base0033.dts - Device Tree file for IGEP AQUILA EXPANSION > > The only two you should touch: > > am335x-bone.dts (BeagleBone White) > am335x-boneblack.dts (BeagleBone Black) > > If you want to pastebin.com your current *.dts I'll look at it..
btw, i added some more notes to: http://elinux.org/Beagleboard:Capes_3.8_to_3.14#Custom_dtb This feedback always helps us tune the wiki for the next new user.. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
