On Wed, Sep 3, 2014 at 1:51 PM, Jason Kridner <[email protected]> wrote: > Started some testing of the latest 3.14 build > (http://builds.beagleboard.org/builders/runtests/builds/27) today. > > I found the 8-19 image from > http://elinux.org/Beagleboard:BeagleBoneBlack_Debian seemed to require > me to copy a bbb-uEnv.txt file to uEnv.txt on the FAT partition to > make it boot from the microSD card. Seems to me that should be the > default.
It became the default after 8-19.. > > Install with 'dpkg -i XXX.deb' and reboot was pretty easy. > > Got an oops on mmcblk0 (microSD) (http://paste.debian.net/119196/): > [ 5479.495347] mmcqd/0: page allocation failure: order:1, > mode:0x204020 [ 5479.495395] CPU: 0 PID: 43 Comm: mmcqd/0 Not tainted > 3.14.17-git302cf583bc3db28305d83071e50c957354e3111a #2 [ 5479.495458] > [<c0015cf0>] (unwind_backtrace) from [<c00128d0>] > (show_stack+0x10/0x14) [ 5479.495490] [<c00128d0>] (show_stack) from > [<c0762bb4>] (dump_stack+0x68/0x84) [ 5479.495526] [<c0762bb4>] > (dump_stack) from [<c00ea768>] (warn_alloc_failed+0xcc/0x10c) [ > 5479.495555] [<c00ea768>] (warn_alloc_failed) from [<c00ed7cc>] > (__alloc_pages_nodemask+0x7bc/0x960) [ 5479.495583] [<c00ed7cc>] > (__alloc_pages_nodemask) from [<c011f0fc>] > (cache_alloc_refill+0x358/0x58c) [ 5479.495605] [<c011f0fc>] > (cache_alloc_refill) from [<c011f5cc>] (__kmalloc+0x104/0x198) [ > 5479.495642] [<c011f5cc>] (__kmalloc) from [<c045ee14>] > (edma_prep_slave_sg+0x98/0x2d4) [ 5479.495674] [<c045ee14>] > (edma_prep_slave_sg) from [<c06099d8>] > (omap_hsmmc_request+0x3e4/0x4d8) [ 5479.495710] [<c06099d8>] > (omap_hsmmc_request) from [<c05f3b24>] (mmc_start_request+0x128/0x250) > [ 5479.495737] [<c05f3b24>] (mmc_start_request) from [<c05f4bc4>] > (mmc_start_req+0x170/0x32c) [ 5479.495774] [<c05f4bc4>] > (mmc_start_req) from [<c06021c8>] (mmc_blk_issue_rw_rq+0xc0/0xae8) [ > 5479.495800] [<c06021c8>] (mmc_blk_issue_rw_rq) from [<c0602e20>] > (mmc_blk_issue_rq+0x230/0x4d8) [ 5479.495825] [<c0602e20>] > (mmc_blk_issue_rq) from [<c06041e4>] (mmc_queue_thread+0x9c/0x13c) [ > 5479.495855] [<c06041e4>] (mmc_queue_thread) from [<c005fb20>] > (kthread+0xd0/0xf0) [ 5479.495880] [<c005fb20>] (kthread) from > [<c000eea8>] (ret_from_fork+0x14/0x2c) Weird, it comes up clean: http://pastebin.com/vDc3VfSx > Also, I have an Ethernet cable connected and that came up fine, but > the usb0 interface doesn't show up: This is the "console" right? That doesn't do anything fancy, it just boots with a very clean image. As that is what those users wanted.. > > root@beaglebone:~# ifconfig > eth0 Link encap:Ethernet HWaddr 90:59:af:69:c0:42 > inet addr:192.168.2.138 Bcast:192.168.2.255 Mask:255.255.255.0 > inet6 addr: fe80::9259:afff:fe69:c042/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:513522 errors:0 dropped:0 overruns:0 frame:0 > TX packets:109359 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:690469697 (658.4 MiB) TX bytes:15468479 (14.7 MiB) > Interrupt:56 > > lo Link encap:Local Loopback > inet addr:127.0.0.1 Mask:255.0.0.0 > inet6 addr: ::1/128 Scope:Host > UP LOOPBACK RUNNING MTU:65536 Metric:1 > RX packets:0 errors:0 dropped:0 overruns:0 frame:0 > TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:0 > RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) > > Hacking with cape-universal using dtb-builder right now. Another ugly > side-effect I'm seeing is that one of the pins seems to be driven, > despite me not setting it up as anything. I'm going to try to address > this in the dtb. Regards, -- Robert Nelson http://www.rcn-ee.com/ -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
