Robert, I did the changes in the bb-kernel/KERNEL/arch/arm/boot/dts/am335x-boneblack.dts and lcd and rs232 capes both work fine. Is there any reason I should not continue with 3.15 kernel and revert to 3.13 ?
Thanks Rob On Monday, 8 September 2014 12:34:10 UTC+1, RobertCNelson wrote: > > On Sun, Sep 7, 2014 at 7:15 PM, Moscowbob <[email protected] <javascript:>> > wrote: > > > > BBB boot from tftp and nfs - > > kernel: 3.15.10-bone8 > > rootfs: debian-jessie-console-armhf-2014-08-13 > > > > Hardware: > > BBB A5C > > Circuitco LCD4 cape > > Circuitco RS232 cape > > So to achieve this with a kernel (not v3.8.x) > > http://elinux.org/Beagleboard:Capes_3.8_to_3.14 > > sudo apt-get update > sudo apt-get install linux-image-3.14.17-ti-r17 > > (reboot) > > git clone -b 3.14-ti https://github.com/RobertCNelson/dtb-rebuilder.git > cd dtb-rebuilder/ > > nano ./src/arm/am335x-boneblack.dts > > Disable hdmi: > #include "am335x-boneblack-nxp-hdmi-audio.dtsi" -> /* #include > "am335x-boneblack-nxp-hdmi-audio.dtsi" */ > > Disable proto cape: > #include "am335x-bone-basic-proto-cape.dtsi" -> /* #include > "am335x-bone-basic-proto-cape.dtsi" */ > > Enable lcd 4: > /* #include "am335x-bone-lcd4-01-00a1.dtsi" */ -> #include > "am335x-bone-lcd4-01-00a1.dtsi" > > Enable uart (there's 3 options: uart1/uart2/uart4) > > For uart 1: > /* #include "am335x-bone-ttyO1.dtsi" */ -> #include > "am335x-bone-ttyO1.dtsi" > > make > sudo make install > > (reboot) > > lcd and serial should work with a non v3.8.x capemgr kernel.. > > (i'm hoping someone comes out with an html5 gui for the above ^^) > > Regards, > > -- > Robert Nelson > http://www.rcn-ee.com/ > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
