Thanks Marc, these few lines are very useful since I need 2 USB hosts and don't want to add a USB hub. About the supply, maybe adding inductor filters like on USB1 schematic would be better.
Vince. Le jeudi 17 avril 2014 12:01:27 UTC+2, marc...@gmail.com a écrit : > > Hello > I have finally managed to get my hands on an BBB and started to try and > get my system up and running the way I need by building a kernel (3.14.1). > > I am attempting to use the USB client port (USB0) in host mode and think I > have done all the things necessary to get this working: > > Kernel config has EHCI enabled and set to host only > Hardware mod on the board to short pins 4&5 of micro socket to force > USB-ID low to indicate host mode. > Changed the arch/arm/boot/dts/am335x-bone-common.dtsi file to put it into > host mode > u...@47401000 <javascript:> { > status = "okay"; > dr_mode = "host"; > }; > u...@47401800 <javascript:> { > status = "okay"; > dr_mode = "host"; > }; > > No matter what I plug in nothing gets identified ??? > > Plugging into the USB1 host port is fine so the kernel is configured > correctly. > > > Boot log shows ports being identified: > [ 2.057294] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver > [ 2.063996] musb-hdrc musb-hdrc.0.auto: new USB bus registered, > assigned bus number 1 > [ 2.072673] usb usb1: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 2.079868] usb usb1: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.087467] usb usb1: Product: MUSB HDRC host driver > [ 2.092722] usb usb1: Manufacturer: Linux 3.14.1 musb-hcd > [ 2.098402] usb usb1: SerialNumber: musb-hdrc.0.auto > [ 2.104856] hub 1-0:1.0: USB hub found > [ 2.108880] hub 1-0:1.0: 1 port detected > [ 2.117574] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver > [ 2.124275] musb-hdrc musb-hdrc.1.auto: new USB bus registered, > assigned bus number 2 > [ 2.133045] usb usb2: New USB device found, idVendor=1d6b, > idProduct=0002 > [ 2.140253] usb usb2: New USB device strings: Mfr=3, Product=2, > SerialNumber=1 > [ 2.147851] usb usb2: Product: MUSB HDRC host driver > [ 2.153105] usb usb2: Manufacturer: Linux 3.14.1 musb-hcd > [ 2.158786] usb usb2: SerialNumber: musb-hdrc.1.auto > [ 2.165268] hub 2-0:1.0: USB hub found > [ 2.169312] hub 2-0:1.0: 1 port detected > > Any ideas ??? > > Thanks > marc > > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.