Dear Robert, Is it possible to update eMMC in the same way as we do it for Nand. Like : read the MLO in ram address 0x82000000 then from RAM we can write into eMMC.
Please suggest interface used to do this. Putting into SD card partition and then flashing auto mode. Please suggest if I can use mmc erase blk count mmc write addr #blk count. Thanks Niraj On Sun, Aug 24, 2014 at 11:55 PM, Robert Nelson <robertcnel...@gmail.com> wrote: > On Sun, Aug 24, 2014 at 9:02 AM, Niraj Kumar <jhanira...@googlemail.com> > wrote: > > Hi, > > I am able to boot uboot. I can see uboot report No NAND device but > suppose > > to be 2GB NAND device the Rev B boards? > > NAND =/= eMMC.. The RevB boards are shipped with 2GB of eMMC.. > > Regards, > > > -- > Robert Nelson > http://www.rcn-ee.com/ > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to a topic in the > Google Groups "BeagleBoard" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/beagleboard/QAzmdicMeo0/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > beagleboard+unsubscr...@googlegroups.com. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
