You've accomplished more than I've managed to do. Could you suggest some references I could check so I can figure out what silly mistakes I'm making?
Cheers, Tim On Tuesday, September 9, 2014 3:57:58 AM UTC-4, Mickae1 wrote: > > you should switch to debian, you will have more help from the Debian > community ..... I've a BBB under debian which start QT at bootup ! > > Micka, > > Le dimanche 7 septembre 2014 14:03:35 UTC+2, Mahendra Gunawardena a écrit : >> >> >> Below is picture of the display on bootup. Expected display output is >> overwritten by Angstrom screen >> >> >> <https://lh6.googleusercontent.com/-0ZA2QPRpNi8/VAxGxNd11yI/AAAAAAAAABs/lvJbktseYgY/s1600/IMG_3852.JPG> >> Expected Display output >> >> >> <https://lh4.googleusercontent.com/-6jEzdpYTOQ0/VAxG86ZQFzI/AAAAAAAAAB0/LcFlyIPkwfE/s1600/IMG_3853.JPG> >> The expected display output briefly appears but is overwritten by the >> Angstrom text based image. But occasionally the expected display >> appears. Then the dynamic widgets update the screen but the static >> information is not visible. The issues appears to be timing, and if the >> BBB can be forced to start the QT application after complete bootup of BBB >> that would suffices the current needs. >> >> Application is been started as a service. Below is the content of the >> service file >> >> [Unit] >> Description=QTAccelerometer GUI >> After=systemd-user-sessions.service >> >> [Service] >> WorkingDirectory=/home/root/projects/qt-projects >> ExecStart=/home/root/projects/qt-projects/QTAccelerometer -qws >> SyslogIdentifier=QTAccelerometer >> Restart=on-failure >> RestartSec=5 >> >> [Install] >> Alias=display-manager.service >> >> >> Below are the other options tried without success >> >> [Install] >> WantedBy=multi-user.target >> WantedBy=graphical.target >> >> >> *References* >> >> - Creating Ångström System Services on BeagleBone Black >> <http://mattrichardson.com/BeagleBone-System-Services/> >> >> I have also posted this question on Stackoverflow >> <http://stackoverflow.com/questions/25701662/start-qt-application-on-bootup-on-an-embedded-linux-device-beaglebone-black> >> . >> >> Thank you in advance >> >> Mahen >> > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to beagleboard+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
