Thanks so much for your very informative reply :)
On 09/12/2014 12:06 PM, Robert Nelson wrote:
On Fri, Sep 12, 2014 at 12:01 PM, David Lambert <[email protected]> wrote:
I just decided to update my image using RCN's netinstall
sudo ./mk_mmc.sh --mmc /dev/sdd --dtb am335x-boneblack --firmware --no-swap
--serial-mode
Now I realize that I do not understand how this system boots. I used to
believe that the onchip ROM looked for the file MLO in the boot partition,
but there no longer appears to be one!
Could someone direct me as to how the initial boot sequence works??
The MLO/u-boot.img files are now dd'ed to the disk:
dd if=MLO of=/dev/sdX count=1 seek=1 conv=notrunc bs=128k
dd if=u-boot.img of=/dev/sdX count=2 seek=1 conv=notrunc bs=384k
So a 'vfat' partition is no longer needed.
So, only the location of MLO/u-boot.img changed, everything else is
relatively the same.
Regards,
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
