Make sure hardware control flow are set to "none" in both puTTY and device manager for the COM port. Then make sure if using a serial debug cable as you seem to be saying you are. That TX on cable is connected to RX on J1, and RX on cable is connected to TX on J1.NO idea what your experience level is here so I'll just mention that.
On Thu, Sep 18, 2014 at 12:49 AM, leo mayer <[email protected]> wrote: > I get none of them. I tried as well reinstall the Win drivers, as well as > Putty-access. Nope, doesn't work. I would say its the image which hangs, > but no idea where and what. > > Other ideas? > > Is it possible to flash the existing image? I posted my attempt at the > very beginning but somehow this failed. Ideas for this part? > > >> You "should" either get random text from something booting or a stream >> of "CCCCC's" >> >> If you get neither, either the serial is plugged in wrong, terra term >> doesn't have the correct port. >> >> Regards, >> >> -- >> Robert Nelson >> http://www.rcn-ee.com/ >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
