So I installed the Debian distribution, and now the RTC only updates the clock on reboot (warm start) not on boot (cold start)
When i do an Boot: root@beaglebone:~# dmesg | grep 'i2c\|rtc' [ 0.000000] Kernel command line: console=tty0 console=ttyO0,115200n8 quiet root=UUID=e7ab605c-ecc8-4fe9-9154-b35e06995d8a ro rootfstype=ext4 rootwait fixrtc quiet init=/lib/systemd/systemd [ 0.131015] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 0.131930] input: tps65217_pwr_but as /devices/ocp.3/44e0b000.i2c/i2c-0/0-0024/input/input0 [ 0.140321] omap_i2c 44e0b000.i2c: unable to select pin group [ 0.140845] omap_i2c 4819c000.i2c: bus 1 rev0.11 at 100 kHz [ 0.142187] omap_i2c 4819c000.i2c: unable to select pin group [ 0.753692] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0 [ 0.753892] i2c /dev entries driver [ 0.979232] [drm] Cannot find any crtc or sizes - going 1024x768 [ 1.050535] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 20.396105] rtc-ds1307 1-0068: rtc core: registered ds1307 as rtc1 [ 20.396133] rtc-ds1307 1-0068: 56 bytes nvram [ 20.401854] i2c i2c-1: new_device: Instantiated device ds1307 at 0x68 *[ 22.496899] i2c i2c-1: Failed to register i2c client ds1307 at 0x68 (-16)* -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
