I'm trying to generate a custom eMMC-flasher image. To start with I've used the BBB-eMMC-flasher-debian-7.6-console-armhf-2014-09-04-2gb.img and burnt it onto my BeagleBone Black (rev C with 4GB eMMC).
Added some of my aplications etc and wanted to make a 'flasher' image to use it on other BeagleBones Black. But when I run the setup_sdcard.sh as described here: https://github.com/RobertCNelson/omap-image-builder I get: ./setup_sdcard.sh --img BBB-eMMC-flasher-debian-7.X-YYYY-MM-DD --uboot bone --beagleboard.org-production --bbb-flasher --boot_label BEAGLE_BONE --rootfs_label eMMC-Flasher --enable-systemd 0+0 records in 0+0 records out 0 bytes (0 B) copied, 7.3333e-05 s, 0.0 kB/s ----------------------------- ERROR: --dtb undefined After adding --dtb parameter : ./setup_sdcard.sh --img BBB-eMMC-flasher-debian-7.X-YYYY-MM-DD --uboot bone --beagleboard.org-production --bbb-flasher --boot_label BEAGLE_BONE --rootfs_label eMMC-Flasher --enable-systemd --dtb beaglebone 0+0 records in 0+0 records out 0 bytes (0 B) copied, 7.5792e-05 s, 0.0 kB/s ----------------------------- That's all I get. Looks like it copies no records to the image. Am I doing something wrong ? How can I generate my own 'flasher image' ? Regards, Piotr -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
