Thank you for the information. I heard back from E14, they said they were checking. Sounds like everything before Rev C is not up to spec.
Gerald On Thu, Sep 25, 2014 at 3:38 AM, Laurent d'Havé <[email protected]> wrote: > I have just received a batch of RevC boards, and eeprom seems to be > programmed correctly. I have yet to test them all out, but serial number > uses all digits, and eeprom is "cleaner" > (old eeprom had the string 123456789ABCDEF couple of bytes after the > serial number) > > The one i had trouble with were Rev A5 > > On Wednesday, September 24, 2014 5:38:07 PM UTC+2, Gerald wrote: >> >> I contacted my contacts at E14. I have yet to get a response. >> >> Gerald >> >> >> On Wed, Sep 24, 2014 at 10:05 AM, Laurent d'Havé <[email protected]> >> wrote: >> >>> i'm sure it does Gerald >>> I can send eeprom dumps if necessary, tryed to find a way to get in >>> contact on E14 website, but gave up after trying to find my way on their >>> huge website. If you have a contact i'll gladly sort it out with them. >>> >>> On Wednesday, September 24, 2014 4:21:35 PM UTC+2, Gerald wrote: >>>> >>>> Well, can't speak for E14, but this is not correct and violates our >>>> specification. >>>> >>>> Gerald >>>> >>>> On Wed, Sep 24, 2014 at 7:51 AM, mickeyf <[email protected]> >>>> wrote: >>>> >>>>> We use the MAC address, as suggested by Christian. "Works for us." >>>>> >>>>> >>>>> On Wednesday, September 24, 2014 1:46:38 AM UTC-7, Laurent d'Havé >>>>> wrote: >>>>>> >>>>>> Hello >>>>>> >>>>>> For a project we have a couple of BBB. We have ordered them from >>>>>> Element14 . >>>>>> >>>>>> The problem we have is that the 32kb eeprom is EXACTLY the same for >>>>>> boards that have a following serial number. >>>>>> >>>>>> ex : 4002112 has the same eeprom as 4002111 >>>>>> >>>>>> This is unacceptable for us, as we had planned to use that as a >>>>>> unique ID (since it's supposed to be !!) >>>>>> >>>>>> >>>>>> Apart from reprogramming the eeprom ourselves (a pain as all BBB have >>>>>> been put in enclosures already ... ), does anyone have a solution ? >>>>>> >>>>>> >>>>>> >>>>>> Thank you >>>>>> >>>>> -- >>>>> For more options, visit http://beagleboard.org/discuss >>>>> --- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "BeagleBoard" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>> For more options, visit http://beagleboard.org/discuss >>> --- >>> You received this message because you are subscribed to the Google >>> Groups "BeagleBoard" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
