I've been having issues connecting to the outside network and I have absolutely no clue why...
There was no issues in installing the drivers and accessing my browser at http://192.168.7.2 Also there was no issues to ssh into the root The BBB is running the latest upgrade: root@beaglebone:~# uname -a Linux beaglebone 3.8.13 #1 SMP Wed Sep 4 09:09:32 CEST 2013 armv7l GNU/Linux In the Mac OSX (running ver. 10.9.5) I went into System Preferences > Sharing > Allowed Internet Sharing (via WIFI) for the BeagleBone Black Also, I disabled the Firewall by going into System Preferences > Security & Privacy > Firewall > Turn off Firewall I turned on the gatewaying in order to forward traffic onto the BBB by doing the following on the OS X terminal: sudo su ifconfig en3 192.168.7.1 (where en3 is the BBB's interface) sysctl -w net.inet.ip.fw.enable=1 sysctl -w net.inet.ip.forwarding=1 natd -interface en0 (where en0 is the interface for the Mac's Internet connection) ipfw add divert natd ip from any to any via en0 I followed some instruction found in this forum by modifing the /usr/bin/g-ether-load.sh script which sets up the USB Ethernet connection. I added the following 2 lines of codes to the bottom of the script file. /sbin/route add default gw 192.168.7.1 echo "nameserver 8.8.8.8" >> /etc/resolv.conf Yet, for some reason I still cannot reach the outside network on the BBB: root@beaglebone:~# ping 8.8.8.8 connect: Network is unreachable root@beaglebone:~# ping www.google.com ping: unknown host www.google.com Below is the information of the network and the IP routing table when running ifconfig and route on the BBB root@beaglebone:~# ifconfig eth0 Link encap:Ethernet HWaddr 1C:BA:8C:90:38:5D UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:56 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:24 errors:0 dropped:0 overruns:0 frame:0 TX packets:24 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1520 (1.4 KiB) TX bytes:1520 (1.4 KiB) usb0 Link encap:Ethernet HWaddr 8E:1A:FF:1B:E6:B6 inet addr:192.168.7.2 Bcast:192.168.7.3 Mask:255.255.255.252 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2166 errors:0 dropped:0 overruns:0 frame:0 TX packets:1527 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:176350 (172.2 KiB) TX bytes:561859 (548.6 KiB) root@beaglebone:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.7.0 * 255.255.255.252 U 0 0 0 usb0 After getting tired of having the same problem over and over I went on my friends computer (running Windows 7) and followed the instructions found in this tutorial and had no problems connecting the first try... https://www.youtube.com/watch?v=fzRVVtGNfj8&list=UUf_sAmhBw7Tj7-2ujmLFoQg I'm assuming that there's an issue with the Mac internet sharing... What am I doing wrong? Any input would be appreciated.. Thanks!! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
