Thank you for the link. After reading this guide I think it has to few
steps for me. I am not good enough for it to fully understand it.
W dniu 2014-09-30 13:28, Robert Nelson pisze:
On Sep 30, 2014 5:38 AM, "Bremenpl" <[email protected]
<mailto:[email protected]>> wrote:
>
> Robert,
> I just noticed that in the console image when i mount up the
mmcblk0p1 that means I am mounting whole filesystem of the beaglebone
on the usb. Could you explain me how can I create a custom flash space
formatted in ie. fat32 and make it avaible on usb? This is new to me,
because in the regular image there was the fat partition of about
100MB under mmcblk0p1.
You know for the level of customization you seem to need. Neither of
my images are going to work for you.. Just use my guide here and setup
everything you need.
http://eewiki.net/display/linuxonarm/BeagleBone+Black
>
>
> W dniu 2014-09-30 11:30, Robert Nelson pisze:
>>
>> On Tue, Sep 30, 2014 at 3:26 AM, bremenpl <[email protected]
<mailto:[email protected]>> wrote:
>>
>>> Hello there,
>>> Recently I have flashed my beaglebone black re C with the console
image (
>>> http://elinux.org/Beagleboard:BeagleBoneBlack_Debian#2014-09-03 ). The
>>> problem I have run into is that:
>>> Power Button doesnt work,
>>> There is No USB0 network adapter like in standard beaglebone black
image.
>>> Also the little flash disk is not present as well on the host side.
>>>
>>> I have managed to resolve the 1st issue by this script, but I am
not sure
>>> either it is sufficient:
>>>
https://clarenceho.net/blog/articles/2013/09/14/using-the-power-button-on-beaglebone-black-for-shutdown
>>>
>>> As for the second one, I have no idea how to install the network
adapter
>>> with the flash space.
>>> I would really aprichiate any help here, Those options are
crussial for my
>>> application.
>>
>> The startup script is here:
>>
>>
https://github.com/RobertCNelson/boot-scripts/blob/master/boot/am335x_evm.sh
>>
>> it needs to be placed in:
>>
>> /opt/scripts/boot/
>>
>> you will also need to install "udhcpd"...
>>
>> Regards,
>>
>
> --
> Bremenpl
>
>
> --
> For more options, visit http://beagleboard.org/discuss
> --- You received this message because you are subscribed to the
Google Groups "BeagleBoard" group.
> To unsubscribe from this group and stop receiving emails from it,
send an email to [email protected]
<mailto:beagleboard%[email protected]>.
> For more options, visit https://groups.google.com/d/optout.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to a topic in the
Google Groups "BeagleBoard" group.
To unsubscribe from this topic, visit
https://groups.google.com/d/topic/beagleboard/fEJt8vwU7Gc/unsubscribe.
To unsubscribe from this group and all its topics, send an email to
[email protected]
<mailto:[email protected]>.
For more options, visit https://groups.google.com/d/optout.
--
Bremenpl
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups "BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
