OMAP3530-GP ES3.1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 720
MHz
OMAP3 Beagle board +
LPDDR/NAND
I2C:
ready
DRAM: 256
MiB
NAND: 512
MiB
MMC: OMAP SD/MMC:
0
*** Warning - bad CRC, using default
environment
In:
serial
Out:
serial
Err:
serial
Beagle Rev
C4
No EEPROM on expansion
board
timed out in wait_for_bb:
I2C_STAT=1000
No EEPROM on expansion
board
Die ID
#5eca000700000000015154781801101e
musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split,
HB-ISO)
musb-hdrc: MHDRC RTL version
1.400
musb-hdrc: setup fifo_mode
4
musb-hdrc: 28/31 max ep, 16384/16384
memory
USB Peripheral mode controller at 480ab000 using PIO, IRQ
0
Net:
usb_ether
Hit any key to stop autoboot:
0
mmc0 is current
device
gpio: pin 173 (gpio 173) value is
1
gpio: pin 7 (gpio 7) value is
0
SD/MMC found on device
0
reading
uEnv.txt
** Unable to read file uEnv.txt
**
reading
zImage
** Unable to read file zImage
**
Booting from nand
...
NAND read: device 0 offset 0x280000, size
0x400000
4194304 bytes read:
OK
Bad Linux ARM zImage magic!
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
