Mark, thank you for the info, this is very useful. On Thu, Oct 2, 2014 at 12:16 PM, Mark A. Yoder <[email protected]> wrote:
> Here's[1] the instructions I gave my students. > > --Mark > > [1] http://elinux.org/EBC_Pulse_Width_Modulation > > On Wednesday, October 1, 2014 11:45:33 PM UTC-4, Bill Gray wrote: >> >> >> So, I'm trying to get PWM up and running on my BBB. >> >> I've spent a good deal of time trying to track down instructions on the >> web, and found a whole bunch of stuff... but none of it seems to be >> applicable to my particular system... nor do they appear to agree with each >> other? >> >> I am running the latest Debian image. >> >> Is there a simple straight forward guide for how to enable and use PWM? >> >> My project is in C++ and I am able to get all of the UART and GPIO >> functions working just fine following online instructions... but for some >> reason PWM is a different story. >> >> Thanks, >> >> Bill >> > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
