I accidentally attached an incorrect .rc file with some additional testing material in it. I'm attaching the proper one now.
On Tuesday, October 7, 2014 1:10:50 AM UTC, Andrew Henderson wrote:
>
> I have not made a new premade image with USB ADB, but I have it working.
> In your current BBBAndroid image, replace your uEnv.txt (/boot partition)
> with the one I have attached. Replace your two init.genericam33xx*.rc
> files (/rootfs partition) with the two I have attached. In addition to
> getting USB ADB up and running, the main .rc file also changes some
> permissions to make them more relaxed. Now, i2c-tools work without
> superuser privileges and it "wakes up" all four GPIO banks in case you need
> to mmap() the GPIO registers.
>
> If you watch the FTDI output from the BBB (when the USB is plugged in at
> boot), you'll see something like the following:
>
> [ 5.784087] CAUTION: musb: Babble Interrupt Occurred
> [ 5.854604] CAUTION: musb: Babble Interrupt Occurred
> [ 6.048723] CAUTION: musb: Babble Interrupt Occurred
> [ 6.119724] CAUTION: musb: Babble Interrupt Occurred
> [ 6.341756] gadget: high-speed config #1: FunctionFS
>
> On your dev system side, use ADB to list the devices:
>
> $ adb devices
> List of devices attached
> BBBANDROID device
>
> $ adb logcat
> ...
> D/AlarmScheduler( 917): No events found starting within 1 week.
> I/ActivityManager( 592): Waited long enough for: ServiceRecord{a5fb0900
> u0 com.android.calendar/.alerts.InitAlarmsService}
> D/InitAlarmsService( 917): Clearing and rescheduling alarms.
> D/ConnectivityService( 592): Sampling interval elapsed, updating
> statistics ..
> D/ConnectivityService( 592): Done.
> D/ConnectivityService( 592): Setting timer for 720seconds
>
>
> On Sunday, October 5, 2014 5:24:27 PM UTC, Andrew Henderson wrote:
>>
>> USB ADB is currently being worked on. The image I provided builds in
>> FunctionFS support, but I have not yet made the modifications to the .rc
>> files to point ADB to FunctionFS. I'm currently working on a few
>> modifications to the .rc files to make the image a bit more "BBB friendly"
>> for those interested in using it for Android hardware interfacing practice.
>>
>> On Sunday, October 5, 2014 12:31:33 PM UTC-4, Lei Wang wrote:
>>>
>>> May I ask if ADB over USB is supported in this release? Thanks very
>>> much! -lei
>>
>>
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
"BeagleBoard" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
init.genericam33xx(flatteneddevicetr.rc
Description: Binary data
