Hi, Our board uses arago project on it. The kernel is 3.12 and in the directory /sys/devices/, there is no capemgr.* . Therefore, I am not able to use the device tree overlays (.dtbo).
We want to change the pinmux on the P8 and P9 header and also turn the internal pull up resistor of the UART0_RX on. Therefore, we need to modify the current beaglebone black .dtb file. My question are as follows: 1. Can I just replace the current am335x-boneblack.dtb with the new .dtb file to make the pinmux changes? Or do i need to load the new .dtb file up and how? 2. I see that there are a lot of .dtb in the /boot/ folder. How to load different .dtb when board boots up? Regards, Shu -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
