Here is an example: https://forums.adafruit.com/viewtopic.php?f=49&t=54034&p=273057&hilit=gps+ultimate+c#p273057
search the Adafruit beaglebone forum for Ultimate GPS On Thu, Oct 9, 2014 at 10:21 AM, <[email protected]> wrote: > Hi, > > My beaglebone blacks system (kernel and software) is on sdcard. I dont > use the internal flash. > I want to connect an Utlimate GPS chip by Adafruit > (http://www.adafruit.com/product/746) > to the Beaglebone black. This chip uses an UART type of connection. > > Is it posible to connect the chip to the serial header, which already > exist on the beaglebone black PCB, if I switch off the serial console in > uEnv.txt > or may this harm the GPS chip, because any garbage which comes out of > the header while booting the board kills/harms it? > > Any precautions I have to take? Or is this the wrong way to go? > > Thank you very much for any help in advance! > > Best regards, > mcc > > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- John Stampfl -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
