I'm stuck. After I flash Angstrom, I get serial access as expected. After I flash Ubuntu (various versions, including the latest BBB-eMMC-flasher-ubuntu-14.04-console-armhf-2014-08-13-2gb.img, I am locked out. That is: no serial (as expected, I had this with my earlier BBB) but also no SSH to 192.168.7.2 either.
*What went before, very briefly: (all via USB)* Power up out of the box, serial on Angstrom OK. Flash Ubuntu, power down, power up, SSH access on 192.168.7.2 OK. (user ubuntu, pwd temppwd) Insert root password, power off, power on, SSH access, root login OK Modify /etc/network/interfaces for Static IP: #auto eth0 #iface eth0 inet dhcp # ================================================================== # static IP auto eth0 iface eth0 inet static address 192.168.0.134 netmask 255.255.255.0 gateway 192.168.0.1 dns-nameservers 213.46.228.196 62.179.104.196 This is exactly what I did with my earlier BBB. After this change, power down, power up. NO ACCESS via USB. Not in serial mode, not with SSH to 192.168.7.2 or 192.168.0.134 I reflashed several time forth an back to Angstrom, but the result is always: Serial on Angstrom yes, SSH on Ubuntu no. I can see the BBB as thumb drive with my file browser on the PC, all the files from the uSD seem to be copied to eMMC. I can open START.htm on the BBB from my file browser, Firefox starts, the "getting started" page is displayed. Anyone? Thanks! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
