I believe (via email correspondence) that the people at Tindie have been busy with the Arduino sketch for the past 2 weeks and should have something out within the next 2 weeks (my guess at their time frame)
I've been hounding Bosch for the Linux device drivers.....unfortunately nothing yet. Bosch did send the API, but my focus is Linux so ideally need a Linux device driver. I'm hoping they release a "DTS" enabled, kernel 3.4 & 3.15+ driver. "...new Bosch sensor really looks great!..." It certainly does, provided they release some decent software and if it performs I suspect it's going to clean up and certainly force Invensense to sharpen up their offering. "...port them for the beaglebone.." Well if you don't mind I might ping you an email and follow your progress? I'm using: https://www.olimex.com/Products/SOM/A13/A13-SOM-512/ https://www.olimex.com/Products/SOM/A20/A20-SOM-4GB/ Cheers Bruce On Wed, Oct 15, 2014 at 2:30 PM, <[email protected]> wrote: > The new Bosch sensor really looks great! Do you know whether there are > already some arduino sketches available, as the author says in the > description at tindie? Would be cool to read some code and port them for the > beaglebone. Im about to build my own quadcopter and used the Bosch BMA180 > Accelerometer and l3g4200d Gyrometer so far, but I want some more accurate > measurements than just combining them by a complementary filter. I ordered > the MPU6050 now, but I don't like the way the DMP is controlled. The BNO055 > really seems to combine all benefits into one single chip. And it even > features a magnetometer, which might be useless on a quad though. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
