Hi everyone, I'm new on the forum and decided to register since I couldn't find an answer to my problem.
I have a BBB (rev A6A) which shipped with Ångström, with this it worked perfectly to ssh over USB with ip 192.168.7.2 I decided to switch to Debian Wheezy, and I now have 7.6 with kernel "3.8.13-bone30" and simply connecting the beaglebone USB cable that came with it to my computer (windows 8) does not result in anything, it does not even show up as a device of some sort. I googled around and managed to come a little closer to a solution, but I am now stuck. Here is what I can do: I work my way to /lib/modules/3.8.13-bone30/kernel/drivers/usb/gadget and there I can "modprobe g_ether", which makes my windows computer recognize the beaglebone as a linux modem/router (something similar) and it shows up in device manager. I then follow the guide from here http://elinux.org/BeagleBoardBeginners (section "Connect with your beagleboard using VNC and ethernet over USB"), I managed to "ifconfig usb0" and give it an ipadress and it even says that it is sending and receiving packages, but I cannot ssh into it using the ipaddress that "ifconfig usb0" mentions. It feels like I am missing something vital. What do I need to do to be able to ssh over USB with debian wheezy in the same fashion as I did when i used Ångström? TLDR; ssh over usb worked with ångström, switched to Debian wheezy 7.6 and this no longer works (windows 8 does not recognize the BBB automatically and BBB does not want to load the correct usb-drivers). What to do in order to ssh over USB?? Thanks in advance! -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
