Hello! Now I have the debug cable. Here is a boot without my cap. Power from USB:
> <14><\0><\r><\n> > > U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)<\r><\n> > > reading args<\r><\n> > > spl_load_image_fat_os: error reading image args, err - -1<\r><\n> > > reading u-boot.img<\r><\n> > > reading u-boot.img<\r><\n> > > <\r><\n> > > <\r><\n> > > U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)<\r><\n> > > <\r><\n> > > I2C: ready<\r><\n> > > DRAM: 512 MiB<\r><\n> > > NAND: 0 MiB<\r><\n> > > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1<\r><\n> > > *** Warning - readenv() failed, using default environment<\r><\n> > > <\r><\n> > > Net: <ethaddr> not set. Validating first E-fuse MAC<\r><\n> > > cpsw, usb_ether<\r><\n> > > Hit any key to stop autoboot: 1 <\b><\b><\b> 0 <\r><\n> > > gpio: pin 53 (gpio 53) value is 1<\r><\n> > > Card did not respond to voltage select!<\r><\n> > > mmc0(part 0) is current device<\r><\n> > > Card did not respond to voltage select!<\r><\n> > > gpio: pin 56 (gpio 56) value is 0<\r><\n> > > gpio: pin 55 (gpio 55) value is 0<\r><\n> > > gpio: pin 54 (gpio 54) value is 0<\r><\n> > > mmc1(part 0) is current device<\r><\n> > > gpio: pin 54 (gpio 54) value is 1<\r><\n> > > SD/MMC found on device 1<\r><\n> > > reading uEnv.txt<\r><\n> > > 1473 bytes read in 5 ms (287.1 KiB/s)<\r><\n> > > gpio: pin 55 (gpio 55) value is 1<\r><\n> > > Loaded environment from uEnv.txt<\r><\n> > > Importing environment from mmc ...<\r><\n> > > Checking if uenvcmd is set ...<\r><\n> > > gpio: pin 56 (gpio 56) value is 1<\r><\n> > > Running uenvcmd ...<\r><\n> > > reading zImage<\r><\n> > > 3717760 bytes read in 206 ms (17.2 MiB/s)<\r><\n> > > reading initrd.img<\r><\n> > > 2869128 bytes read in 161 ms (17 MiB/s)<\r><\n> > > reading /dtbs/am335x-boneblack.dtb<\r><\n> > > 25080 bytes read in 9 ms (2.7 MiB/s)<\r><\n> > > Kernel image @ 0x82000000 [ 0x000000 - 0x38ba80 ]<\r><\n> > > ## Flattened Device Tree blob at 88000000<\r><\n> > > Booting using the fdt blob at 0x88000000<\r><\n> > > Using Device Tree in place at 88000000, end 880091f7<\r><\n> > > <\r><\n> > > Starting kernel ...<\r><\n> > > <\r><\n> > > Uncompressing Linux... done, booting the kernel.<\r><\n> > > [ 0.383105] omap2_mbox_probe: platform not supported<\r><\n> > > [ 0.549652] tps65217-bl tps65217-bl: no platform data provided<\r><\n> > > [ 0.614898] bone-capemgr bone_capemgr.9: slot #0: No cape found<\r><\n> > > [ 0.652004] bone-capemgr bone_capemgr.9: slot #1: No cape found<\r><\n> > > [ 0.689113] bone-capemgr bone_capemgr.9: slot #2: No cape found<\r><\n> > > [ 0.726221] bone-capemgr bone_capemgr.9: slot #3: No cape found<\r><\n> > > [ 0.744938] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' >> failed<\r><\n> > > [ 0.779292] pinctrl-single 44e10800.pinmux: pin 44e10854 already >> requested by 44e10800.pinmux; cannot claim for gpio-leds.8<\r><\n> > > [ 0.790961] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status >> -22<\r><\n> > > [ 0.798259] pinctrl-single 44e10800.pinmux: could not request pin 21 on >> device pinctrl-single<\r><\n> > > Loading, please wait...<\r><\n> > > [ 1.098874] bone-capemgr bone_capemgr.9: failed to load firmware >> 'CAPE-BONE-MY-00A0.dtbo'<\r><\n> > > [ 1.107899] bone-capemgr bone_capemgr.9: loader: failed to load slot-7 >> CAPE-BONE-MY:00A0 (prio 0)<\r><\n> > > Scanning for Btrfs filesystems<\r><\n> > > systemd-fsck[298]: rootfs: clean, 77345/230144 files, 469161/919296 >> blocks<\r><\n> > > [ 6.119657] c_can_platform 481cc000.d_can: invalid resource<\r><\n> > > [ 6.187620] c_can_platform 481d0000.d_can: invalid resource<\r><\n> > > <\r><\n> > > Debian GNU/Linux 7 beaglebone ttyO0<\r><\n> > > <\r><\n> > > default username:password is [debian:temppwd]<\r><\n> > > <\r><\n> > > Support/FAQ: http://elinux.org/Beagleboard:BeagleBoneBlack_Debian<\r><\n> > > <\r><\n> > > The IP Address for usb0 is: 192.168.7.2<\r><\n> > > beaglebone login: [ 12.722950] libphy: PHY 4a101000.mdio:01 not >> found<\r><\n> > > [ 12.728053] net eth0: phy 4a101000.mdio:01 not found on slave 1<\r><\n> > > > Not sure why he write "failed to load firmware 'CAPE-BONE-MY-00A0.dtbo' " But with this I can boot and work. I put my own cap on top and boot again (Power from my cape): <6><\0>G??EW?!I(<4>hX<6>?`Z<5><11>`Ye5)[&`R<7>??X<22>?hP<18>dZd<5>dYSl\<7>?6?reading >> args<\r><\n> > > spl_load_image_fat_os: error reading image args, err - -1<\r><\n> > > reading u-boot.img<\r><\n> > > reading u-boot.img<\r><\n> > > <\r><\n> > > <\r><\n> > > U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54)<\r><\n> > > <\r><\n> > > I2C: ready<\r><\n> > > DRAM: 512 MiB<\r><\n> > > NAND: 0 MiB<\r><\n> > > MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1<\r><\n> > > *** Warning - readenv() failed, using default environment<\r><\n> > > <\r><\n> > > Net: <ethaddr> not set. Validating first E-fuse MAC<\r><\n> > > cpsw, usb_ether<\r><\n> > > Hit any key to stop autoboot: 1 <\b><\b><\b> 0 <\r><\n> > > gpio: pin 53 (gpio 53) value is 1<\r><\n> > > Card did not respond to voltage select!<\r><\n> > > mmc0(part 0) is current device<\r><\n> > > Card did not respond to voltage select!<\r><\n> > > gpio: pin 56 (gpio 56) value is 0<\r><\n> > > gpio: pin 55 (gpio 55) value is 0<\r><\n> > > gpio: pin 54 (gpio 54) value is 0<\r><\n> > > mmc1(part 0) is current device<\r><\n> > > gpio: pin 54 (gpio 54) value is 1<\r><\n> > > SD/MMC found on device 1<\r><\n> > > reading uEnv.txt<\r><\n> > > 1473 bytes read in 5 ms (287.1 KiB/s)<\r><\n> > > gpio: pin 55 (gpio 55) value is 1<\r><\n> > > Loaded environment from uEnv.txt<\r><\n> > > Importing environment from mmc ...<\r><\n> > > Checking if uenvcmd is set ...<\r><\n> > > gpio: pin 56 (gpio 56) value is 1<\r><\n> > > Running uenvcmd ...<\r><\n> > > reading zImage<\r><\n> > > 3717760 bytes read in 206 ms (17.2 MiB/s)<\r><\n> > > reading initrd.img<\r><\n> > > 2869128 bytes read in 161 ms (17 MiB/s)<\r><\n> > > reading /dtbs/am335x-boneblack.dtb<\r><\n> > > 25080 bytes read in 9 ms (2.7 MiB/s)<\r><\n> > > Kernel image @ 0x82000000 [ 0x000000 - 0x38ba80 ]<\r><\n> > > ## Flattened Device Tree blob at 88000000<\r><\n> > > Booting using the fdt blob at 0x88000000<\r><\n> > > Using Device Tree in place at 88000000, end 880091f7<\r><\n> > > <\r><\n> > > Starting kernel ...<\r><\n> > > <\r><\n> > > Uncompressing Linux... done, booting the kernel.<\r><\n> > > [ 0.459086] omap2_mbox_probe: platform not supported<\r><\n> > > [ 0.667742] tps65217-bl tps65217-bl: no platform data provided<\r><\n> > > [ 0.738828] bone-capemgr bone_capemgr.9: slot #0: No cape found<\r><\n> > > [ 0.777888] bone-capemgr bone_capemgr.9: slot #1: No cape found<\r><\n> > > [ 0.813044] bone-capemgr bone_capemgr.9: slot #2: No cape found<\r><\n> > > [ 0.848199] bone-capemgr bone_capemgr.9: slot #3: No cape found<\r><\n> > > [ 0.871847] omap_hsmmc mmc.5: of_parse_phandle_with_args of 'reset' >> failed<\r><\n> > > [ 0.909180] pinctrl-single 44e10800.pinmux: pin 44e10854 already >> requested by 44e10800.pinmux; cannot claim for gpio-leds.8<\r><\n> > > [ 0.923774] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.8) status >> -22<\r><\n> > > [ 0.932895] pinctrl-single 44e10800.pinmux: could not request pin 21 on >> device pinctrl-single<\r><\n> > > Loading, please wait...<\r><\n> > > mount: relocation error: mount: symbol strcasecmp, version GLIBC_2.4 not >> defined in file libc.so.6 with link time reference<\r><\n> > > mount: relocation error: mount: symbol strcasecmp, version GLIBC_2.4 not >> defined in file libc.so.6 with link time reference<\r><\n> > > /scripts/init-top/udev: line 14: can't create /sys/kernel/uevent_helper: >> nonexistent directory<\r><\n> > > [ 1.532405] BUG: spinlock bad magic on CPU#0, init/96<\r><\n> > > [ 1.539037] Unable to handle kernel NULL pointer dereference at virtual >> address 00000251<\r><\n> > > [ 1.549596] pgd = de258000<\r><\n> > > [ 1.553124] [00000251] *pgd=00000000<\r><\n> > > [ 1.557799] Internal error: Oops: 5 [#1] SMP THUMB2<\r><\n> > > [ 1.564161] Modules linked in:<\r><\n> > > [ 1.568149] CPU: 0 Not tainted (3.8.13-bone47 #1)<\r><\n> > > [ 1.574753] PC is at spin_dump+0x38/0x64<\r><\n> > > [ 1.579873] LR is at spin_dump+0x2f/0x64<\r><\n> > > [ 1.584991] pc : [<c045885c>] lr : [<c0458853>] psr: >> 600000b3<\r><\n> > > [ 1.584991] sp : de253d70 ip : 00000000 fp : 00100100<\r><\n> > > [ 1.599964] r10: c0825186 r9 : de2352f8 r8 : de235cd0<\r><\n> > > [ 1.606776] r7 : de235300 r6 : de2352fc r5 : de235300 r4 : >> 0000003d<\r><\n> > > [ 1.615294] r3 : c0694a28 r2 : dead4ead r1 : ffffffff r0 : >> 00000029<\r><\n> > > [ 1.623816] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA Thumb >> Segment user<\r><\n> > > [ 1.633463] Control: 50c5387d Table: 9e258019 DAC: 00000015<\r><\n> > > [ 1.640980] Process init (pid: 96, stack limit = 0xde252240)<\r><\n> > > [ 1.648363] Stack: (0xde253d70 to 0xde254000)<\r><\n> > > [ 1.654052] 3d60: 00000060 c0694ab6 >> 0000000f de235300<\r><\n> > > [ 1.664734] 3d80: 00000000 c0225e49 de252000 80000013 00000000 de2352fc >> de235300 de235cd0<\r><\n> > > [ 1.675417] 3da0: de2352f8 c0825186 00100100 c045b6cb de2348a0 c045b533 >> 00100873 de22ec28<\r><\n> > > [ 1.686100] 3dc0: de9627c4 de9627b4 de22ec28 de2348a0 00000000 de22eb20 >> de234980 c009df43<\r><\n> > > [ 1.696782] 3de0: 00287000 de22eb20 00000000 00001000 de253e38 de22ec28 >> 00008000 de22ebd0<\r><\n> > > [ 1.707461] 3e00: de228ac0 c0097b33 de253e38 de22eac8 de22eac8 de22be40 >> de110d40 de22adc0<\r><\n> > > [ 1.718135] 3e20: de22be40 de111144 00000000 c009ba81 204ecd1d 1389868c >> de22be40 00000001<\r><\n> > > [ 1.728807] 3e40: 00000000 c079e784 00513000 00000043 00000400 de245000 >> c009b797 80000013<\r><\n> > > [ 1.739485] 3e60: de22be8c de110d40 de22adc0 de22be40 de22be40 00000000 >> de22be40 00000000<\r><\n> > > [ 1.750168] 3e80: de110d40 c002a30d 00000000 de22be40 de22bac0 c00ad6d5 >> de224474 de224440<\r><\n> > > [ 1.760849] 3ea0: de22adc0 00000002 c07e63a0 df352e40 00000000 c00d5c8b >> de22adc0 00000080<\r><\n> > > [ 1.771532] 3ec0: 00000000 c0099a61 00000000 00000000 de252000 de2243c0 >> be883feb de252000<\r><\n> > > [ 1.782208] 3ee0: 00000000 de22adc0 00000001 befffe9a de252000 de252000 >> 00000000 de253eb8<\r><\n> > > [ 1.792892] 3f00: 00000017 de253f14 00000008 c022df4d c08adcc0 de22adc0 >> fffffff8 c07e724c<\r><\n> > > [ 1.803567] 3f20: 00000000 c07e63a0 c07e63b0 00000000 c00d5a9d c00acc11 >> 00000000 00000060<\r><\n> > > [ 1.814242] 3f40: 00000060 00000001 df061010 de22adc0 00000001 df17cec0 >> df061010 0008929c<\r><\n> > > [ 1.824917] 3f60: 000892ac 00000000 00000000 c00adcbf 00000000 de110fac >> df061000 000892ac<\r><\n> > > [ 1.835593] 3f80: 0008929c 0000000b c000c1c4 de252000 00000000 c00adf19 >> 0008929c 00089274<\r><\n> > > [ 1.846271] 3fa0: ffffffff c000c021 0008929c 00089274 00089274 0008929c >> 000892ac 000892ac<\r><\n> > > [ 1.856954] 3fc0: 0008929c 00089274 ffffffff 0000000b ffffffff 000915bc >> ffffffff 00000000<\r><\n> > > [ 1.867635] 3fe0: 0000000b be880f7c b6eaa133 b6e4ef96 80000030 00089274 >> 7e6c4ff1 1df7cef2<\r><\n> > > [ 1.878343] [<c045885c>] (spin_dump+0x38/0x64) from [<c0225e49>] >> (do_raw_spin_lock+0x15/0xfc)<\r><\n> > > [ 1.889485] [<c0225e49>] (do_raw_spin_lock+0x15/0xfc) from [<c045b6cb>] >> (_raw_spin_lock_irqsave+0xd/0x10)<\r><\n> > > [ 1.901989] [<c045b6cb>] (_raw_spin_lock_irqsave+0xd/0x10) from >> [<c045b533>] (__down_write_nested+0xf/0x84)<\r><\n> > > [ 1.914718] [<c045b533>] (__down_write_nested+0xf/0x84) from >> [<c009df43>] (unlink_anon_vmas+0x4b/0x104)<\r><\n> > > [ 1.926989] [<c009df43>] (unlink_anon_vmas+0x4b/0x104) from >> [<c0097b33>] (free_pgtables+0x2f/0x6a)<\r><\n> > > [ 1.938691] [<c0097b33>] (free_pgtables+0x2f/0x6a) from [<c009ba81>] >> (exit_mmap+0x7d/0x128)<\r><\n> > > [ 1.949620] [<c009ba81>] (exit_mmap+0x7d/0x128) from [<c002a30d>] >> (mmput+0x37/0xaa)<\r><\n> > > [ 1.959630] [<c002a30d>] (mmput+0x37/0xaa) from [<c00ad6d5>] >> (flush_old_exec+0x3a9/0x43c)<\r><\n> > > [ 1.970329] [<c00ad6d5>] (flush_old_exec+0x3a9/0x43c) from [<c00d5c8b>] >> (load_elf_binary+0x1ef/0xcb8)<\r><\n> > > [ 1.982377] [<c00d5c8b>] (load_elf_binary+0x1ef/0xcb8) from >> [<c00acc11>] (search_binary_handler+0x87/0x25a)<\r><\n> > > [ 1.995100] [<c00acc11>] (search_binary_handler+0x87/0x25a) from >> [<c00adcbf>] (do_execve+0x1d7/0x29c)<\r><\n> > > [ 2.007136] [<c00adcbf>] (do_execve+0x1d7/0x29c) from [<c00adf19>] >> (sys_execve+0x21/0x2c)<\r><\n> > > [ 2.017826] [<c00adf19>] (sys_execve+0x21/0x2c) from [<c000c021>] >> (ret_fast_syscall+0x1/0x46)<\r><\n> > > [ 2.028960] Code: 4b0a f04f 31ff b11c (f8d4) 1214 <\r><\n> > > [ 2.035215] ---[ end trace c3e1aefa5f748bfb ]---<\r><\n> > > Segmentation fault<\r><\n> > > > There seems a lot of wrong? First line beginn with unnormal Chars. And continue until he load my own CAP. Then a lot of errors. I order Solderless Flexible Breadboard Jumper Cable Wires. Then I can connect Pin by Pin and always boot betweem and checkl with I/O are made the trouble. But maybe someone see the error in the debug log? -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
