Are you doing this part correctly? http://www.elinux.org/Beagleboard:BeagleBoneBlack#Expansion_Header_Usage
Gerald On Tue, Oct 21, 2014 at 1:20 PM, crazybucket <[email protected]> wrote: > I'm working on a project and we keep seeing this bizarre issue where GPIO > pins just stop working. > > We've hooked up pin 25 (GPIO 117) to the receive side of a 3.3v RS485 > transceiver to monitor for traffic on the bus. The pin seems to work for a > little bit, and then stop working forever. > > To add another level of bizarreness, this problem does not happen on the > older beaglebone whites we have, only the blacks. > > Any ideas? We can't find anything wrong with how we've hooked it up or the > signals coming in/out of the board. > > -- > For more options, visit http://beagleboard.org/discuss > --- > You received this message because you are subscribed to the Google Groups > "BeagleBoard" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. > -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. For more options, visit https://groups.google.com/d/optout.
